Mid-Range DDR2-800 from G.Skill
- Posted in
- Memory
Stock Memory Performance
Most Intel Socket T (Socket 775) motherboards provide a wide range of memory ratios that match available DDR2 memory. End-users can select the memory ratio that matches their DDR2 memory speed. Our memory testing begins with the same approach. We first test all of the stock ratios at the fastest stable timings we can achieve at the given ratio. With ratios, CPU speed remains the same at 2.93GHz in our memory test bed, and memory speed is varied by selecting different ratios.
There are some downsides to this approach. With the memory controller in the chipset, instead of part of the processor as in AM2 systems, there is a small performance penalty for speeds other than a 1:1 ratio (DDR2-533 in this case). The performance penalty is actually very small and has minimal impact on test results. As a result memory scales nicely through the various speed options.
DDR2 memory is then pushed from the highest stock ratio that could be achieved in testing - in this case 1067 - to the highest FSB speed at the stock multiplier. In the case of the G.Skill DDR2-800 speeds higher than DDR2-1067 were not completely stable. While we could boot as high as DDR2-1100 we could not complete our memory benchmarks at speeds above DDR2-1067 with the maximum 2.4V available on the ASUS P5W-DH. Boards with an extended top voltage range, like the DFI 590 for AM2, may be able to squeeze even more performance from these G.Skill DIMMs.
It is also worth pointing out that two sets of DDR2-800 benchmarks were run. The G.Skill memory required more voltage than the more expensive Micron D9 chips to perform with stability at 3-3-3 DDR2-800 timings. The great news is that they could match the fast 3-3-3 timings we have seen on other Micron D9, but they required 2.35V to do this, where the more normal required voltage is 2.2V.
Many buyers of mid-range DDR2-800 memory will not have a high-end motherboard that can supply voltages like 2.35V in their system. For that reason we also tested the specified 4-4-4 timings at DDR2-800. Those results were a very pleasant surprise since we achieved stability with just 1.9V at 4-4-4-12 timings. This is a voltage that any Core 2 Duo or AM2 motherboard should be able to deliver.
You can also see that 2.35V was required to reach stable performance at DDR2-1067. The good news is that the G.Skill DDR2-800 can be overclocked to DDR2-1067, but you will need voltage to reach that overclock. While we did not include results in the chart we did try to see how far we could push the G.Skill with 5-5-5-15 timings and a more modest 2.0V. The memory remained stable to just above DDR2-1000 at 2.0V.
This performance pattern gives most every buyer some choices when using this G.Skill DDR2-800 in their system. If their board is voltage limited, the memory is still usable at slightly slower timings. If the board supplies a very wide voltage range, then you can likely squeeze even better timings from this memory with higher voltage.
Most Intel Socket T (Socket 775) motherboards provide a wide range of memory ratios that match available DDR2 memory. End-users can select the memory ratio that matches their DDR2 memory speed. Our memory testing begins with the same approach. We first test all of the stock ratios at the fastest stable timings we can achieve at the given ratio. With ratios, CPU speed remains the same at 2.93GHz in our memory test bed, and memory speed is varied by selecting different ratios.
There are some downsides to this approach. With the memory controller in the chipset, instead of part of the processor as in AM2 systems, there is a small performance penalty for speeds other than a 1:1 ratio (DDR2-533 in this case). The performance penalty is actually very small and has minimal impact on test results. As a result memory scales nicely through the various speed options.
![]() |
| Click to enlarge |
DDR2 memory is then pushed from the highest stock ratio that could be achieved in testing - in this case 1067 - to the highest FSB speed at the stock multiplier. In the case of the G.Skill DDR2-800 speeds higher than DDR2-1067 were not completely stable. While we could boot as high as DDR2-1100 we could not complete our memory benchmarks at speeds above DDR2-1067 with the maximum 2.4V available on the ASUS P5W-DH. Boards with an extended top voltage range, like the DFI 590 for AM2, may be able to squeeze even more performance from these G.Skill DIMMs.
It is also worth pointing out that two sets of DDR2-800 benchmarks were run. The G.Skill memory required more voltage than the more expensive Micron D9 chips to perform with stability at 3-3-3 DDR2-800 timings. The great news is that they could match the fast 3-3-3 timings we have seen on other Micron D9, but they required 2.35V to do this, where the more normal required voltage is 2.2V.
Many buyers of mid-range DDR2-800 memory will not have a high-end motherboard that can supply voltages like 2.35V in their system. For that reason we also tested the specified 4-4-4 timings at DDR2-800. Those results were a very pleasant surprise since we achieved stability with just 1.9V at 4-4-4-12 timings. This is a voltage that any Core 2 Duo or AM2 motherboard should be able to deliver.
You can also see that 2.35V was required to reach stable performance at DDR2-1067. The good news is that the G.Skill DDR2-800 can be overclocked to DDR2-1067, but you will need voltage to reach that overclock. While we did not include results in the chart we did try to see how far we could push the G.Skill with 5-5-5-15 timings and a more modest 2.0V. The memory remained stable to just above DDR2-1000 at 2.0V.
This performance pattern gives most every buyer some choices when using this G.Skill DDR2-800 in their system. If their board is voltage limited, the memory is still usable at slightly slower timings. If the board supplies a very wide voltage range, then you can likely squeeze even better timings from this memory with higher voltage.
Originally published at https://www.anandtech.com/show/2113 (Wayback Machine).
