D-Link DIR-625: Another Draft N Router comes up short
- Posted in
- Networking
Unencrypted Throughput - Client to Server:
Our throughput test compares the performance of our D-Link DIR-625 against the three Draft N routers and the NetGear RangeMax 240 based upon Pre-N MIMO technology. This router features the proprietary third generation Airgo chipset and to date this technology has held the lead in wireless throughput and distance. Belkin has chosen not to support 802.11n or 802.11g only transmission modes so we tested the N1 router with the wireless option set to mixed n/g/b mode. In the test results we are reporting today there are not any 802.11b or 802.11g compliant devices active so the scores should be comparable. In our next series of articles we will look at true mixed mode results along with compatibility between our 802.11n Draft 1.0 devices and other wireless standards.



The NetGear WPNT834 Pre-N router has the highest throughput overall and continues to show a very consistent throughput pattern up to 120 feet. The Belkin N1 and D-Link DIR-625 excel at 40 and 80 feet in maximum throughput compared to our other Draft N routers. At 120 feet the throughput of the Atheros XSpan chipset equipped Belkin and D-Link routers fall off considerably. The NetGear WNR834B still provides the most consistent throughput across the full test spectrum of the Draft N routers.
Encrypted Throughput (WPA2-PSK) - Client to Server:



We spent an inordinate amount of time testing our routers and clients with WPA2-PSK security enabled as the test results were not always consistent or complete. After the final firmware and driver updates we were able to consistently achieve the results shown. However, at first glance you will notice that our encrypted results in the average throughput test are higher than the unencrypted results at 10 feet. We already know that 802.11n Draft 1.0 specifies WPA2 security protocol as the preferred method of encrypted transmission and it appears the hardware is optimized for it at close distances. In order to reach the throughput results we reported your network will have to be free of legacy devices and utilizing the recommended wireless adaptor for the router.
While the 10 foot distance shows very little loss and actually gains for most of the routers we see an issue with the Belkin N1 and D-Link suffering an 18% loss with encryption enabled in the maximum throughput results. This is not surprising as both units are based on the same chipset. On our 40 foot test we see the D-Link DIR-625 experiencing a 53% performance hit in the average throughput numbers and 51% at 80 feet. Our Linksys router after the last firmware update still has a performance issue with WPA2-PSK enabled at the 80 foot range. Once again the NetGear WPNT834 offers the most consistent performance.
Our throughput test compares the performance of our D-Link DIR-625 against the three Draft N routers and the NetGear RangeMax 240 based upon Pre-N MIMO technology. This router features the proprietary third generation Airgo chipset and to date this technology has held the lead in wireless throughput and distance. Belkin has chosen not to support 802.11n or 802.11g only transmission modes so we tested the N1 router with the wireless option set to mixed n/g/b mode. In the test results we are reporting today there are not any 802.11b or 802.11g compliant devices active so the scores should be comparable. In our next series of articles we will look at true mixed mode results along with compatibility between our 802.11n Draft 1.0 devices and other wireless standards.



The NetGear WPNT834 Pre-N router has the highest throughput overall and continues to show a very consistent throughput pattern up to 120 feet. The Belkin N1 and D-Link DIR-625 excel at 40 and 80 feet in maximum throughput compared to our other Draft N routers. At 120 feet the throughput of the Atheros XSpan chipset equipped Belkin and D-Link routers fall off considerably. The NetGear WNR834B still provides the most consistent throughput across the full test spectrum of the Draft N routers.
Encrypted Throughput (WPA2-PSK) - Client to Server:



We spent an inordinate amount of time testing our routers and clients with WPA2-PSK security enabled as the test results were not always consistent or complete. After the final firmware and driver updates we were able to consistently achieve the results shown. However, at first glance you will notice that our encrypted results in the average throughput test are higher than the unencrypted results at 10 feet. We already know that 802.11n Draft 1.0 specifies WPA2 security protocol as the preferred method of encrypted transmission and it appears the hardware is optimized for it at close distances. In order to reach the throughput results we reported your network will have to be free of legacy devices and utilizing the recommended wireless adaptor for the router.
| Unencrypted versus Encrypted Throughput Maximum Mbps - Percentage Difference |
||||
| Client to Server | 10 Feet | 40 Feet | 80 Feet | 120 Feet |
| D-Link DIR-625 | -18.24% | -9.94% | -6.25% | -27.03% |
| Belkin N1 | -18.13% | -15.41% | -6.18% | -16.28% |
| NetGear WNR834B | -9.91% | 8.29% | -14.19% | -6.58% |
| Linksys WRT-300N | -9.25% | -7.80% | -41.61% | -18.34% |
| NetGear WPNT834 (Pre-N) | -9.55% | -14.19% | -11.56% | -13.70% |
| . | ||||
| Unencrypted versus Encrypted Throughput Average Mbps - Percentage Difference |
||||
| Client to Server | 10 Feet | 40 Feet | 80 Feet | 120 Feet |
| D-Link DIR-625 | 4.04% | -53.85% | -51.04% | -58.11% |
| Belkin N1 | 4.23% | -62.80% | -54.64% | -25.00% |
| NetGear WNR834B | 4.92% | -6.74% | -25.82% | -11.81% |
| Linksys WRT-300N | 13.17% | -18.18% | -47.35% | -10.84% |
| NetGear WPNT834 (Pre-N) | -1.79% | -5.36% | -5.48% | -9.15% |
| . | ||||
While the 10 foot distance shows very little loss and actually gains for most of the routers we see an issue with the Belkin N1 and D-Link suffering an 18% loss with encryption enabled in the maximum throughput results. This is not surprising as both units are based on the same chipset. On our 40 foot test we see the D-Link DIR-625 experiencing a 53% performance hit in the average throughput numbers and 51% at 80 feet. Our Linksys router after the last firmware update still has a performance issue with WPA2-PSK enabled at the 80 foot range. Once again the NetGear WPNT834 offers the most consistent performance.
Originally published at https://www.anandtech.com/show/2083 (Wayback Machine).