Silence is Golden: Silent GPU Roundup
- Posted in
- GPUs
Test Setup
We felt it best to include as many games as possible for our performance tests in order to get the best view of how these cards perform on both newer games and ones that have been around for a while. The games we used for our tests are Oblivion, Battlefield 2, Half-Life 2 Episode 1, Quake 4, Rise of Legends, Splinter Cell Chaos Theory, and F.E.A.R. When possible, we ran the benchmarks at four resolutions, 800x600, 1024x768, 1280x1024, and 1600x1200. F.E.A.R doesn't support 1280x1024, so we used 1280x960 instead, and Rise of Legends doesn't support resolutions lower than 1024x768.
Because some of these cards have only 128 MBs of memory, we ran tests at lower quality settings in each of the games for these cards, but we'll deal with these cards in the following "Lower Range Performance" section. We generally test with higher quality settings enabled because we find many gamers prefer to play games with graphics quality settings on high with "bells-and-whistles" like HDR effects, sacrificing their screen resolution to make up for the performance hit (especially given that a large number of gamers still use older monitors that can only display resolutions of up to 1280x1024 or 1600x1200). This isn't the case for all gamers, and many prefer higher resolutions and lower quality graphical settings; but for the purposes of this article we find this to be the best choice for testing.
Something to note is that many of these cards are clocked at the same reference speeds, so we will see several cards with identical numbers in our tests. Because we are dealing with so many cards, comparing performance between them all is somewhat daunting, but we hope to give the reader a good idea of how these cards rank in performance relative to each other for each of the games in the next sections.
This is the system we used for testing:
*Note that sound was disabled for testing. Testing was also performed in an open air environment rather than inside a case. This eliminated the need for a case fan, but it is not fully representative of how the various cards will run once placed inside a typical case. We will have a future article examining how the various silent cards perform inside a case, and depending on the case and cooling used overall temperatures may be lower or higher. As we stated in the introduction, we would advice some caution for those looking to build a fully silent computer. It is likely easier, cheaper, and more reliable to build a nearly-silent system by using a single low-RPM 120mm fan (perhaps with a voltage mod to further reduce fan speed) than to have an absolutely silent system that overheats under load.
We felt it best to include as many games as possible for our performance tests in order to get the best view of how these cards perform on both newer games and ones that have been around for a while. The games we used for our tests are Oblivion, Battlefield 2, Half-Life 2 Episode 1, Quake 4, Rise of Legends, Splinter Cell Chaos Theory, and F.E.A.R. When possible, we ran the benchmarks at four resolutions, 800x600, 1024x768, 1280x1024, and 1600x1200. F.E.A.R doesn't support 1280x1024, so we used 1280x960 instead, and Rise of Legends doesn't support resolutions lower than 1024x768.
Because some of these cards have only 128 MBs of memory, we ran tests at lower quality settings in each of the games for these cards, but we'll deal with these cards in the following "Lower Range Performance" section. We generally test with higher quality settings enabled because we find many gamers prefer to play games with graphics quality settings on high with "bells-and-whistles" like HDR effects, sacrificing their screen resolution to make up for the performance hit (especially given that a large number of gamers still use older monitors that can only display resolutions of up to 1280x1024 or 1600x1200). This isn't the case for all gamers, and many prefer higher resolutions and lower quality graphical settings; but for the purposes of this article we find this to be the best choice for testing.
Something to note is that many of these cards are clocked at the same reference speeds, so we will see several cards with identical numbers in our tests. Because we are dealing with so many cards, comparing performance between them all is somewhat daunting, but we hope to give the reader a good idea of how these cards rank in performance relative to each other for each of the games in the next sections.
This is the system we used for testing:
| Test Bed Components | |
| Motherboard: | NVIDIA nForce4 |
| Processor: | AMD Athlon 64 FX-55 2.6 GHz |
| Memory: | 2x1024MB OCZ 2-2-2-6 DDR-400 |
| Hard Drive: | Seagate 7200.7 120GB |
| Power Supply: | OCZ 600W PowerStream |
*Note that sound was disabled for testing. Testing was also performed in an open air environment rather than inside a case. This eliminated the need for a case fan, but it is not fully representative of how the various cards will run once placed inside a typical case. We will have a future article examining how the various silent cards perform inside a case, and depending on the case and cooling used overall temperatures may be lower or higher. As we stated in the introduction, we would advice some caution for those looking to build a fully silent computer. It is likely easier, cheaper, and more reliable to build a nearly-silent system by using a single low-RPM 120mm fan (perhaps with a voltage mod to further reduce fan speed) than to have an absolutely silent system that overheats under load.
Originally published at https://www.anandtech.com/show/2073 (Wayback Machine).