Archive 1997–2024

ASUS P5NSLI: Core 2 Duo and SLI on a Budget

Basic Features: ASUS P5NSLI

ASUS P5NSLI Specifications
CPU Interface: LGA775-based Pentium 4, Pentium 4 XE, Celeron D,
Pentium D, and Core 2 Duo processors.
Chipset: NVIDIA nForce 570SLI - SPP (C19-A3)
NVIDIA nForce 570SLI - MCP (MCP51-A2)
Front Side Bus: 1066 / 800 / 533 MHz
Front Side Bus Speeds: Auto, 533MHz ~ 1600MHz in 1MHz increments
Memory Speeds: Auto, 400MHz ~ 1200MHz in 1MHz increments
Memory Timings: Auto, CAS, tRCD, tRP, tRAS, tRC, Command Rate
PCI Bus Speeds: Fixed
PCI Express Bus Speeds: Default, 100MHz ~ 150MHz in 1MHz increments
Set Processor Multiplier: Auto, (1X step increments for EE or X series)
LDT Multipliers: 1x, 2x, 3x, 3.5x, 4x, 5x
Core Voltage: Auto, 0.8375V to 1.6000V (in 0.0125V increments).
DRAM Voltage: Auto, 1.8V to 2.1V (in 0.1V increments)
SPP Chipset Voltage: 1.4V. 1.5V
CPU Termination: 1.25V, 1.35V
Memory Slots: (4) x DIMM, max. 4GB per DIMM
max. 16GB total system memory
DDR2 667/533, non-ECC, unbuffered memory
Expansion Slots: (2) x PCI-E X16 (operates in X8+X8 mode for SLI)
(3) x PCI-E X1
(2) x PCI 2.3
Onboard SATA: NVIDIA nForce 570SLI:
(4) x SATA II
Onboard IDE: NVIDIA nForce 570SLI:
(2) x UltraDMA 133/100/66/33
SATA/IDE RAID: NVIDIA nForce 570SLI:
(4) x SATA II
RAID 0, RAID 1, RAID 0+1, RAID 5
Onboard USB2.0: (8) USB2.0 ports
Onboard LAN: Marvell 88E8001 PCI 10/100/1000Mb/s Ethernet LAN
Onboard Audio: ADI 1986A, 6-channel capable HD Audio
Power Connectors: 24-pin ATX
4-pin ATX 12V
Back Panel I/O Ports: 1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel (LPT)
1 x Serial (COM 1)
1 x S/PDIF Coaxial Out
1 x Audio I/O Panel
1 x RJ45
4 x USB
Features: AI Tuning - Manual, Auto, Standard, AI Overclock - 9 options
System Clock Mode - CPU only, Memory Only, CPU/Memory
BIOS: Award 0601

The BIOS layout and configurable options are representative of a mid-range performance system. We would like to note that if the second X16 PCI Express slot is not utilized for a GPU then it will operate as an X1 PCI Express capable slot. The P5NSLI certainly does not offer the same level of controls as the upcoming 590SLI Intel boards or that of current upper-end Intel P965 or 975X boards. However, the options available allow enough control over the BIOS and subsequent performance of the board as not to hinder the user except for one setting.

The one major issue we have with the BIOS is the lack of memory voltage controls over 2.1V. Although this board is targeted to the value performance segment, the lack of voltages over 2.1V for DDR2 memory is unacceptable considering higher performing DDR2-800/667 memory requires around 2.2V for stable operation at the low latency memory timings. This issue will be raised again in our initial overclocking and memory tuning tests. Our belief is that the typical user who is going to spend money on a SLI capable motherboard and SLI GPUs will typically purchase a higher grade memory.

Originally published at https://www.anandtech.com/show/2068 (Wayback Machine).