Archive 1997–2024

AMD Socket-AM2 Performance Preview

Does AM2's Performance Make Sense?

Assuming for a moment that the performance we're seeing here today is representative of what AMD will show off in 2 months, does it make sense? AMD has effectively doubled their memory bandwidth but they've seen virtually no increase in performance, other than in some very isolated situations.

If you'll remember back to the introduction of AMD's Revision E core, we did an article about how the new core brought support four new memory dividers allowing you to run at speeds up to DDR500 without overclocking your CPU or the rest of your system. In that article we looked at the overall performance benefit of DDR-500 over DDR-400 on a Socket-939 platform in a variety of situations. A recap of our performance results is below:

Benchmark Socket-939 (DDR-400) Socket-939 (DDR-480) % Advantage (DDR-480)
Multimedia Winstone 2004 41.9 42.7 2%
3dsmax 6 2.78 2.80 1%
DivX 6.0 50.6 fps 53.2 fps 5%
WME9 4.22 fps 4.28 fps 1%
Quake 3 (10x7) 121.9 fps 127.2 fps 4%
ScienceMark 2.0 (Bandwidth)* 5378 MB/s 5851 MB/s 9%
Note that ScienceMark bandwidth is slightly higher than on the previous page because we used a faster CPU; ScienceMark does vary a bit with CPU speed.

As you can see, given almost a 9% increase in memory bandwidth, we saw similarly small increases in overall performance. It would seem that the Athlon 64, at its current clock speeds, just simply isn't starved enough for memory bandwidth to benefit from an increase in bandwidth. You'll also see that the areas where faster DDR memory helped back then are pretty much the areas where DDR2-800 is showing gains today.

Based on our results from back then, if a 9% increase in memory bandwidth doesn't increase performance tremendously, then the 35% increase in bandwidth we see with DDR2-800 on AM2 shouldn't yield any more of a performance increase. Or simply put, yes, our AM2 performance numbers make sense.

Originally published at https://www.anandtech.com/show/1988 (Wayback Machine).