OCZ EL PC2-8000 XTC: Low Latency PLUS DDR2-1100
- Posted in
- Memory
Memory Test Configuration
We have reviewed several Intel 975x motherboards that overclock well and provide the kind of stability needed for a DDR2 memory test platform. However, OCZ PC2-8000 offered a unique challenge in that it is the first DDR2 memory we have tested rated at DDR2-1000. In addition we fully expected this memory to go well beyond DDR2-1000. We mention this only because most current motherboards are notoriously unreliable as platforms supporting memory speeds above DDR2-1000.
After talking with OCZ, Corsair, and several other enthusiast memory manufacturers, the consensus was that testing above DDR2-1000 would require an ASUS P5WD2-E motherboard. We had one memory test setup with the ASUS board, but our second test bed used another motherboard. To make sure we extracted all the performance possible from this OCZ PC2-8000 EL XTC, the main memory test bed was updated to the ASUS 975x test bed.
The Intel Pentium 955 Extreme Edition CPU, a 1066MHz FSB dual core solution containing 2MB of L2 cache onboard, was continued as our standard memory test CPU. The EE chips have the advantage of operating at 1066FSB, or 266 base, which raises the 1:1 memory to DDR2-533 instead of the DDR2-400 that is the 1:1 match for 800FSB.
The ASUS P5WD2-E supports a very wide range of memory speeds and FSB options. It also actually runs at all the supported settings. If you look closely at the table you will see that a 1066FSB CPU (or overclocked setting) is needed for support of DDR2-889 and DDR2-1067. It is therefore important to use a 1066FSB CPU when testing memory like the OCZ PC2-8000 which can operate at DDR2-1000 and faster. For additional information on the ASUS board, you can read our full ASUS P5WD2-E Premium review.
Our memory test bench uses the following components:
The OCZ EL PC2-8000 is based on the newest Micron memory chips, which are a variant of the Micron D die. The recently tested Mushkin DIMMs are based on Elpida chips. The other three memories - both Crucial DDR2 and the OCZ EB PC2-4200 - are all based on the now discontinued Micron fat-body D chips. The OCZ is based on early Micron DDR2 chips, while both Crucial Ballistix memories are based on later fat-body D versions.
We have reviewed several Intel 975x motherboards that overclock well and provide the kind of stability needed for a DDR2 memory test platform. However, OCZ PC2-8000 offered a unique challenge in that it is the first DDR2 memory we have tested rated at DDR2-1000. In addition we fully expected this memory to go well beyond DDR2-1000. We mention this only because most current motherboards are notoriously unreliable as platforms supporting memory speeds above DDR2-1000.
After talking with OCZ, Corsair, and several other enthusiast memory manufacturers, the consensus was that testing above DDR2-1000 would require an ASUS P5WD2-E motherboard. We had one memory test setup with the ASUS board, but our second test bed used another motherboard. To make sure we extracted all the performance possible from this OCZ PC2-8000 EL XTC, the main memory test bed was updated to the ASUS 975x test bed.
The Intel Pentium 955 Extreme Edition CPU, a 1066MHz FSB dual core solution containing 2MB of L2 cache onboard, was continued as our standard memory test CPU. The EE chips have the advantage of operating at 1066FSB, or 266 base, which raises the 1:1 memory to DDR2-533 instead of the DDR2-400 that is the 1:1 match for 800FSB.
The ASUS P5WD2-E supports a very wide range of memory speeds and FSB options. It also actually runs at all the supported settings. If you look closely at the table you will see that a 1066FSB CPU (or overclocked setting) is needed for support of DDR2-889 and DDR2-1067. It is therefore important to use a 1066FSB CPU when testing memory like the OCZ PC2-8000 which can operate at DDR2-1000 and faster. For additional information on the ASUS board, you can read our full ASUS P5WD2-E Premium review.
| Memory Configuration Options/ASUS P5WD2-E Premium Motherboard | ||||||||
| FSB/RAM | Auto | DDR2-400 | DDR2-533 | DDR2-667 | DDR2-711* | DDR2-800* | DDR2-889* | DDR2-1067* |
| FSB 1066 | X | X | X | X | X | X | X | X |
| FSB 800 | X | X | X | X | X | |||
| FSB 533 | X | X | X | |||||
Our memory test bench uses the following components:
| Memory Test Bench Specifications | |
| Processor: | Intel 955 Extreme Edition at 13X Ratio (3.46 GHZ dual core 65nm CPU) |
| RAM: | OCZ EL PC2-8000 XTC (2x1GB) Mushkin XP2 DDR2 PC2-5300 (2 x 1GB) Crucial Ballistix PC2-6400 (2 x 1GB) Crucial Ballistix PC2-5300 (2 x 1GB) OCZ Platinum EB PC2-4200 |
| Hard Drives: | Hitachi 200GB SATA2 Seagate 7200.9 ST3500641AS SATA NCQ - 16 MB Cache |
| Video Card: | ASUS 7800GTX TOP 256MB - set to 490MHz/1.3GHz EVGA 7800 GTX KO 256MB - 490MHz/1.3GHz |
| Video Drivers: | NVIDIA ForceWare 84.21 |
| Power Supply: | OCZ PowerStream 520W PC Power and Cooling Turbo-Cool 850-SSI |
| Operating System(s): | Windows XP Professional SP2 |
| Motherboard: | ASUS P5WD2-Premium |
| BIOS: | AMI version 0304 February 22; 2006 |
The OCZ EL PC2-8000 is based on the newest Micron memory chips, which are a variant of the Micron D die. The recently tested Mushkin DIMMs are based on Elpida chips. The other three memories - both Crucial DDR2 and the OCZ EB PC2-4200 - are all based on the now discontinued Micron fat-body D chips. The OCZ is based on early Micron DDR2 chips, while both Crucial Ballistix memories are based on later fat-body D versions.
Originally published at https://www.anandtech.com/show/1982 (Wayback Machine).