OCZ EL PC2-8000 XTC: Low Latency PLUS DDR2-1100
- Posted in
- Memory
Overclocking Performance
We were able to overclock using the DDR2-533, DDR2-667, DDR2-711, DDR2-800, DDR2-889, or DDR2-1066 memory straps. Since the Presler 955 Extreme Edition processor utilizes a 1066 MHz bus speed it allows us to use the 1:1 memory to FSB clock ratio when the front side bus speed is set to 266 MHz. Keep in mind that the Intel FSB is quad-pumped, which is why a setting of 266 yields a FSB of 1066 (4x266). DDR2 Memory on the Intel platform, however, is by definition Double Data Rate, so a 266 base setting is 533 (2x266). The dual-channel setups used in nearly all systems keep the bandwidths matched, however, given 2 x DDR2-533 bandwidth.
The chart above indicates relative scaling with front side bus speed increases from a 1:1 memory strap (DDR2-533). SiSoft Sandra Professional Buffered and Unbuffered memory scoring were both included in benchmarking, along with SuperPi time to calculate 2 million places in seconds. The Half Life 2: Lost Coast benchmark was run at 1024x768 resolution at maximum quality settings with HDR on. Far Cry was set for ultra quality in the settings with a resolution of 1024 x 768.
Using the stock 13X multiplier of the 955 EE Presler, we were able to hit 352 FSB at the lowest timings of 3-3-3-11. While higher 1:1 settings were possible, they were not completely stable with our air-cooling setup. That makes the CPU the likely road block to further overclocking with an effective limitation of about 4.5GHz on stock air cooling.
The OCZ PC2-8000 operated with no heat problems up to 2.2V, which covered the majority of benchmarking. Above 2.2 the memory heats up quickly and performs best with an auxiliary fan cooling the memory.
We were able to overclock using the DDR2-533, DDR2-667, DDR2-711, DDR2-800, DDR2-889, or DDR2-1066 memory straps. Since the Presler 955 Extreme Edition processor utilizes a 1066 MHz bus speed it allows us to use the 1:1 memory to FSB clock ratio when the front side bus speed is set to 266 MHz. Keep in mind that the Intel FSB is quad-pumped, which is why a setting of 266 yields a FSB of 1066 (4x266). DDR2 Memory on the Intel platform, however, is by definition Double Data Rate, so a 266 base setting is 533 (2x266). The dual-channel setups used in nearly all systems keep the bandwidths matched, however, given 2 x DDR2-533 bandwidth.
| OCZ EL PC2-8000 XTC (1:1 Memory Ratio) - 2x1GB Double-Bank | |||||||
| CPU Settings |
Memory Speed (1:1) |
Best Memory Timings (Voltage) |
Far Cry (fps) |
Sandra Unbuffered |
Sandra Standard Buffered |
SuperPi Mod 1.4 2M places (time in sec) |
Half Life 2: Lost Coast (fps) |
| 13x267 | 533 DDR2 |
3-2-2-9 1T 2.1V |
63.1 | INT 3570 FLT 3600 |
INT 6500 FLT 6498 |
85 | 84.2 |
| 13x333 | 667 DDR2 |
3-2-3-11 1T 2.1V |
73.9 | INT 4368 FLT 4414 |
INT 8108 FLT 8097 |
68.1 | 106.3 |
| 13x352 | 704 DDR2 |
3-3-3-11 1T 2.2V |
83 | INT 4512 FLT 4630 |
INT 8494 FLT 8504 |
64.9 | 109.8 |
The chart above indicates relative scaling with front side bus speed increases from a 1:1 memory strap (DDR2-533). SiSoft Sandra Professional Buffered and Unbuffered memory scoring were both included in benchmarking, along with SuperPi time to calculate 2 million places in seconds. The Half Life 2: Lost Coast benchmark was run at 1024x768 resolution at maximum quality settings with HDR on. Far Cry was set for ultra quality in the settings with a resolution of 1024 x 768.
Using the stock 13X multiplier of the 955 EE Presler, we were able to hit 352 FSB at the lowest timings of 3-3-3-11. While higher 1:1 settings were possible, they were not completely stable with our air-cooling setup. That makes the CPU the likely road block to further overclocking with an effective limitation of about 4.5GHz on stock air cooling.
The OCZ PC2-8000 operated with no heat problems up to 2.2V, which covered the majority of benchmarking. Above 2.2 the memory heats up quickly and performs best with an auxiliary fan cooling the memory.
Originally published at https://www.anandtech.com/show/1982 (Wayback Machine).