Mushkin XP2 PC2-5300 DDR2 – Xtreme Performance Memory
- Posted in
- Memory
Mushkin XP2 PC2-5300 DDR2: Overclocking Performance
Using the stock 13X multiplier of the 955 EE Presler, we were able to hit 350 FSB easily at the lowest timings of 3-3-3-10, at a 1:1 ratio, as specified by Mushkin. We could scale as high as 360 FSB when we used the 12X multiplier at 1:1 or an effective DDR-721 rate at the lowest timings.
First is a look at the improvement in bandwidth provided at 350 x 13, using the 1-to-1 memory strap. In averaging the INT and Float, there was an improvement of 2221.5 Mb/s in the buffered SiSoft Sandra bandwidth results, while unbuffered results from default to overclocked at 350 x 13 showed an improvement of 1464 Mb/s. You can also note the improvement (as expected when ramping up the front side bus speeds) of approximately 2718 Mb/s for the 16MB Memory Read scores from PCMark05, and approximately 1713 Mb/s in the 16MB Memory Write scores over that from the default values.
If you are looking for good bandwidth gains, the XP2 PC2-5300 DDR2 modules certainly offer the enthusiast that opportunity. Here are just a few of the 360 x 12 results using a 1:1 memory ratio (which was the highest that we could reach with tight timings).
What happens when you relax the timings and push higher? The Mushkin modules are very flexible; once timings were relaxed, this memory really scaled quite well.
Using a 3:2 memory strap, we reached DDR2-1048, using an FSB of 349 x 13 to obtain DDR2-1048 speeds.
Relaxing the memory timings to 4-4-4-10 allowed us in our testing to reach a front side bus speed of 372, using a 12 multiplier. Here are a couple of Everest results from that escapade. It also allowed buffered SiSoft Sandra Professional 2005 bandwidth result of 8.9 Mb/s and unbuffered bandwidth of ~ 4.52 Mb/s.
Using the stock 13X multiplier of the 955 EE Presler, we were able to hit 350 FSB easily at the lowest timings of 3-3-3-10, at a 1:1 ratio, as specified by Mushkin. We could scale as high as 360 FSB when we used the 12X multiplier at 1:1 or an effective DDR-721 rate at the lowest timings.
First is a look at the improvement in bandwidth provided at 350 x 13, using the 1-to-1 memory strap. In averaging the INT and Float, there was an improvement of 2221.5 Mb/s in the buffered SiSoft Sandra bandwidth results, while unbuffered results from default to overclocked at 350 x 13 showed an improvement of 1464 Mb/s. You can also note the improvement (as expected when ramping up the front side bus speeds) of approximately 2718 Mb/s for the 16MB Memory Read scores from PCMark05, and approximately 1713 Mb/s in the 16MB Memory Write scores over that from the default values.
If you are looking for good bandwidth gains, the XP2 PC2-5300 DDR2 modules certainly offer the enthusiast that opportunity. Here are just a few of the 360 x 12 results using a 1:1 memory ratio (which was the highest that we could reach with tight timings).
What happens when you relax the timings and push higher? The Mushkin modules are very flexible; once timings were relaxed, this memory really scaled quite well.
Using a 3:2 memory strap, we reached DDR2-1048, using an FSB of 349 x 13 to obtain DDR2-1048 speeds.
Relaxing the memory timings to 4-4-4-10 allowed us in our testing to reach a front side bus speed of 372, using a 12 multiplier. Here are a couple of Everest results from that escapade. It also allowed buffered SiSoft Sandra Professional 2005 bandwidth result of 8.9 Mb/s and unbuffered bandwidth of ~ 4.52 Mb/s.
Originally published at https://www.anandtech.com/show/1979 (Wayback Machine).














