Archive 1997–2024

VIA PT880 PRO: Biostar’s Deluxe Dual Combo

General Performance & Encoding

General Performance

General Performance

General Performance

General Performance

MPEG-4 Encoding Performance - 'Sum of All Fears' Chapter 9

MPEG-4 Encoding Performance - 'Sum of All Fears' Chapter 9

We have listed the individual results of the Biostar PT880 board with each memory type. We ran our DDR2 memory at 533MHz with 3-2-2-8 settings and our DDR memory at 400MHz at 2.5-3-2-7-1T as we found these settings to be absolutely stable on this board. We tried several benchmarks with a variety of DDR400 modules, but we could not get absolute stability with a CAS Latency setting of 2.

The Biostar PT880 Pro-A7 Combo trails all of the other boards significantly at times, except in 3Dmark05 where it scores in the middle of the pack. We ran our tests several times with each memory type resulting in the same outcome: DDR2 scoring better in the 3DMark03 and 05 benchmarks, but losing to DDR in the 3DMark06 and PCMark 2005 benchmarks.

It is obvious that the PT880 PRO is not competitive with the latest generation of chipsets from Intel and NVIDIA. The Biostar board performed miserably in the encoding tests. The system displayed significant slowdowns at various times in the encoding process that led us to believe we had issues with the drive controller interface due to the abnormal amount of hard drive thrashing. We tried the Microsoft and VIA IDE/SATA drivers with the same results.


Memory Performance

Memory Bandwidth Comparison - Read Performance

Memory Bandwidth Comparison - Write Performance

Memory Latency Comparison

The read and write performance of DDR2 and DDR on this board are very close with the latency test showing a 7% advantage for DDR2 over DDR on this board. The Biostar board's performance was at the bottom of the field and mirrors the results in our synthetic and game benchmarks.

Originally published at https://www.anandtech.com/show/1974 (Wayback Machine).