Updated: AOpen MiniPC – Imitation is the Sincerest Form of Flattery
- Posted in
- Systems
Installation and Setup (cont'd)
The whole package has essentially no wasted space, though we really wouldn't mind a fractionally larger case if that meant a few other extras. A couple more USB ports would be great, and the lack of standard PS/2 mouse and keyboard connections means most people will need a new keyboard at least. Still, you can't fault the design too much, as it does exactly what it's supposed to do.
To give you an idea of the time that it takes to build a system like this, I disassembled the unit, and then checked how long it took me to put it back together. The result? It took about 35 minutes, but that's with everything I needed readily available. If you're fishing for screws, unpacking parts, etc., it would probably be about a two-hour task (counting OS installation time as well as some time spent referencing the manual to make sure it was done properly). You'll also want some small screwdrivers, perhaps with magnetized bits to hold the screws. (You're not supposed to use magnets around computers, but I've been using such screwdrivers for years without any problems, and it's far more convenient than constantly dropping tiny screws into a case or carpet and then trying to find them. However, follow my example at your own risk.)
Getting the case open is the trickiest part, but the small wire connections and the extraction of the plastic drive cage also take some finesse. If you're not really comfortable working with PC components, you really shouldn't get one of these units as a barebones - and AOpen recommends that most users purchase pre-configured systems.
With the system fully assembled, software installation follows the standard routine. Being a slightly slower HDD and processor relative to most other modern PCs, XP will take a bit longer to install, but it's not really significant. AOpen's EZInstall tool remains as user-friendly as ever, providing one-click installation of all the drivers necessary once you have Windows up and running. Overall, the assembly and setup process was uneventful; it took a bit longer than some of the other SFFs that we've looked at, and everything was smaller and a bit more difficult to work with if you have larger hands, but anyone familiar with building PCs won't have a problem assembling the MiniPC.
The whole package has essentially no wasted space, though we really wouldn't mind a fractionally larger case if that meant a few other extras. A couple more USB ports would be great, and the lack of standard PS/2 mouse and keyboard connections means most people will need a new keyboard at least. Still, you can't fault the design too much, as it does exactly what it's supposed to do.
To give you an idea of the time that it takes to build a system like this, I disassembled the unit, and then checked how long it took me to put it back together. The result? It took about 35 minutes, but that's with everything I needed readily available. If you're fishing for screws, unpacking parts, etc., it would probably be about a two-hour task (counting OS installation time as well as some time spent referencing the manual to make sure it was done properly). You'll also want some small screwdrivers, perhaps with magnetized bits to hold the screws. (You're not supposed to use magnets around computers, but I've been using such screwdrivers for years without any problems, and it's far more convenient than constantly dropping tiny screws into a case or carpet and then trying to find them. However, follow my example at your own risk.)
Getting the case open is the trickiest part, but the small wire connections and the extraction of the plastic drive cage also take some finesse. If you're not really comfortable working with PC components, you really shouldn't get one of these units as a barebones - and AOpen recommends that most users purchase pre-configured systems.
With the system fully assembled, software installation follows the standard routine. Being a slightly slower HDD and processor relative to most other modern PCs, XP will take a bit longer to install, but it's not really significant. AOpen's EZInstall tool remains as user-friendly as ever, providing one-click installation of all the drivers necessary once you have Windows up and running. Overall, the assembly and setup process was uneventful; it took a bit longer than some of the other SFFs that we've looked at, and everything was smaller and a bit more difficult to work with if you have larger hands, but anyone familiar with building PCs won't have a problem assembling the MiniPC.
Originally published at https://www.anandtech.com/show/1957 (Wayback Machine).