Archive 1997–2024

ASRock 939SLI32-eSATA2: ULi Dual x16 SLI

FSB Overclocking Results

Front Side Bus Overclocking Testbed
Processor: AMD Athlon 64 4000+ (San Diego)
AMD Opteron 170 (Toledo)
CPU Voltage: 1.400V (1.300V default)
Memory Settings: 2-2-2-5 1T - (12x)
2.5-3-3-7 1T - (10x)
2.5-4-4-10 1T - (9x)
Memory Voltage: 2.8V
Chipset Voltage: 2.1V
FSB Voltage: 1.40V
HT Multiplier: 5x up to 240HTT, 4x up to 315HTT
Memory: OCZ PC4800 Platinum Edition
Cooling: Thermaltake Big Typhoon
Power Supply: OCZ Power Stream 520
Maximum CPU OverClock (4000+): 237HTT x 12 (2846MHz) +19%
Maximum HTT OverClock (4000+): 315HTT x 9 (2835MHz) +57%
Maximum CPU OverClock (O170): 270HTT x 10 (2700MHz) +35%
Maximum HTT OverClock (O170): 315HTT x 9 (2835MHz) +57%

Our 4000+ CPU was hampered in overclocking by the lack of additional voltage. This CPU has reached 3.1GHz on 1.475V in past testing. The board definitely has the capability to overclock well, but will not reach its true potential without additional CPU and Memory voltages. At these overclock settings, the system was able to complete all of our benchmark test suites three consecutive times and run Prime95 and SuperPI without issue.

Our Opteron 170 faired better due to the lower voltage requirements of the particular CPU when overclocking. However, this CPU has reached 2.95GHz on 1.450V in past testing. We were able to reach 2800MHz with the 10x280 setting, but we could not complete our test suite due to memory issues. Our memory has been able to reach this HTT setting with 3.0V in the past, but we were limited to 2.8V with this board. At the 10x270 and 9x315 overclock settings, the system was able to complete all of our benchmark test suites three consecutive times and run Prime95 and SuperPI without issue. Overall, the board would make a very good platform for enthusiast level overclocking with additional voltage options.


Memory Stress Testing

Memory stress tests look at the ability of the ASRock 939SLI32-eSATA2 to operate at the officially supported memory frequencies of DDR-400, at the best performing memory timings that the OCZ PC4800 Platinum Edition will support.

ASRock 939SLI32-eSATA2
Stable DDR-400 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 5
Command Rate: 1T
Voltage: 2.7V

The ASRock 939SLI32 was extremely stable with 2 DDR modules in Dual-Channel mode at the settings of 2-2-2-5 at 2.7V. We will now install all four available memory slots that result in more strenuous requirements on the memory subsystem than testing 2 DDR modules on a motherboard.

ASRock 939SLI32-eSATA2
Stable DDR-400 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz (800FSB)
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 8
Command Rate: 2T
Voltage: 2.7V

The ASRock 939SLI32 was very stable with 4 DDR modules in Dual-Channel operation at the settings of 2-2-2-8, but required the command rate be increased to 2T that is typical in AMD Athlon 64 based systems.

Originally published at https://www.anandtech.com/show/1956 (Wayback Machine).