Clash of the Titans - TT Tai Chi vs. CM Stacker 830
- Posted in
- Cases/Cooling/PSUs
Cooler Master Stacker 830 (cont’d)
Speaking of the hard drive cage, here is the 830's with a side plate removed to expose the rubber shock-mounts.
All in the all, this hard drive cage is superior to the Tai Chi's in almost every way. It can hold four drives as opposed to the Thermaltake's three, it has rubber mounts to minimize transferred vibrations, and it is not as difficult to get screws into the drives with this cage.
The fan on the drive cage is quite different cosmetically from the other two fans included with the case, but it can be used interchangeably with them.
Once the drive(s) are in the cage, the assembly can be secured in the case, which is easy if a single black plastic clip is on each side already in the bottom position.
Here are the black clips in more detail. The outside has a plastic stub to grip, which when moved towards the lock position, it forces the metal prongs outward.
The larger plastic tabs at the bottom of the clip serve to align drives properly in a vertical fashion, which helps in some ways, but is not completely needed either.
To accommodate a floppy drive or fifth hard drive, a 5¼” to 3½” adapter set is included, as well as a front bezel piece with a 3½” sized opening.
Speaking of the hard drive cage, here is the 830's with a side plate removed to expose the rubber shock-mounts.
All in the all, this hard drive cage is superior to the Tai Chi's in almost every way. It can hold four drives as opposed to the Thermaltake's three, it has rubber mounts to minimize transferred vibrations, and it is not as difficult to get screws into the drives with this cage.
The fan on the drive cage is quite different cosmetically from the other two fans included with the case, but it can be used interchangeably with them.
Once the drive(s) are in the cage, the assembly can be secured in the case, which is easy if a single black plastic clip is on each side already in the bottom position.
Here are the black clips in more detail. The outside has a plastic stub to grip, which when moved towards the lock position, it forces the metal prongs outward.
The larger plastic tabs at the bottom of the clip serve to align drives properly in a vertical fashion, which helps in some ways, but is not completely needed either.
To accommodate a floppy drive or fifth hard drive, a 5¼” to 3½” adapter set is included, as well as a front bezel piece with a 3½” sized opening.

Originally published at https://www.anandtech.com/show/1953 (Wayback Machine).




