FAST 2GB DDR Kits - Part 2
- Posted in
- Memory
G. Skill F1-3200PHU2-2GBZX
G. Skill entered the US market at about the time that Samsung TCCD memory was launched. G. Skill capitalized on the incredible performance of TCCD and produced some excellent TCCD parts that were marketed to enthusiasts on many Forums. We reviewed the early TCCD in PQI & G. Skill: New Choices in 2-2-2 Memory and found that the G. Skill performed very well.
Specifications
G. Skill rates their 1GB DIMMs at DDR400, which is usually an indication that B die Infineon memory chips were used.
Test Results
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.
Test results also point to Infineon B die chips. The G. Skill 2GB kit is very fast from DDR400 to the highest stable overclock that we could achieve at DDR516. This is a very high overclock for B die Infineon memory, showing G. Skill has not lost their expertise in squeezing the most out of the memory chips that they use. If fast performance with 1GB DIMMs from DDR400 to DDR500 will meet your goals, then the G. Skill 2GB kit is a good choice. The only problem, compared to other 2GB kits, is that C die Infineon is just as fast at lower speeds, but C die continues to overclock to DDR550 to 580.
Like the Corsair Infineon B die that we reviewed in Part 1, the G. Skill is a memory that does not need a special board with super high voltages to get the best from the memory. You can get the best from these 1GB with almost any decent motherboard, since we never needed more than 2.8V for stable performance at any speed.
G. Skill entered the US market at about the time that Samsung TCCD memory was launched. G. Skill capitalized on the incredible performance of TCCD and produced some excellent TCCD parts that were marketed to enthusiasts on many Forums. We reviewed the early TCCD in PQI & G. Skill: New Choices in 2-2-2 Memory and found that the G. Skill performed very well.

Specifications
G. Skill rates their 1GB DIMMs at DDR400, which is usually an indication that B die Infineon memory chips were used.
| G. Skill F1-3200PHU2-2GBZX Memory Specifications | |
| Number of DIMMs & Banks | 2 DS |
| DIMM Size Total Memory |
1GB 2GB |
| Rated Timings | 2-3-2-5 at DDR400 |
| Rated Voltage | Standard (2.6V) Voltage |
| SPD | 2-3-2-5 |
Test Results
| G. Skill F1-3200PHU2-2GBZX (DDR400)- 2x1GB Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400DDR | 2-3-2-7 2.5V |
539.5 | INT 2527 FLT 2669 |
INT 6033 FLT 6016 |
82 | 117.6 |
| 11x218 | 436DDR | 2.5-3-2-7 2.6V |
541.2 | INT 2664 FLT 2802 |
INT 6438 FLT 6367 |
82 | 118.2 |
| 10x240 | 480DDR | 2.5-3-2-7 2.7V |
552.2 | INT 2806 FLT 3018 |
INT 6715 FLT 6632 |
81 | 119.3 |
| 9x258 (2.32GHz) |
516DDR | 3-3-2-8 2.8V |
535.7 | INT 2969 FLT 3132 |
INT 6739 FLT 6646 |
82 | 116.3 |
| 10x258 (2.58GHz) |
Highest Mem Speed DDR 516 |
3-3-2-8 2.8V |
571.0 | INT 3041 FLT 3241 |
INT 7179 FLT 7117 |
75 | 127.8 |
Test results also point to Infineon B die chips. The G. Skill 2GB kit is very fast from DDR400 to the highest stable overclock that we could achieve at DDR516. This is a very high overclock for B die Infineon memory, showing G. Skill has not lost their expertise in squeezing the most out of the memory chips that they use. If fast performance with 1GB DIMMs from DDR400 to DDR500 will meet your goals, then the G. Skill 2GB kit is a good choice. The only problem, compared to other 2GB kits, is that C die Infineon is just as fast at lower speeds, but C die continues to overclock to DDR550 to 580.
Like the Corsair Infineon B die that we reviewed in Part 1, the G. Skill is a memory that does not need a special board with super high voltages to get the best from the memory. You can get the best from these 1GB with almost any decent motherboard, since we never needed more than 2.8V for stable performance at any speed.
Originally published at https://www.anandtech.com/show/1928 (Wayback Machine).