Price-Point Comparing Three-Way Case Shootout
- Posted in
- Cases/Cooling/PSUs
Antec P150 (cont'd)
Before popping off the side of the new Antec case, we took a look at the rear and were pleased to see a large 120mm fan, especially given the case's dimensions. As always, larger fans generally are preferred, since they can move more air while making less noise. There's also venting near the expansion slots for additional passive cooling.
To get an unobstructed view of the interior of the P150, we took out the included power supply. What we were left with was simple, but not bad by any means. Overall, the P150 feels very solid. We're sure that it would be able to protect expensive components for a long time, but one would have to be mindful of the nice paint job.
Not including the external 3½" drive bay, the P150 has enough space for four hard drives, which is certainly plenty for most users. In this view, one can see how incoming air is directed over the hard drives, and if one wanted additional cooling, two extra 92mm fans could be installed.
Also note the rubber bands stretched across the sides of this cavity. These can be used for suspending the hard drives to effectively isolate all vibrations entirely from the chassis. Keep in mind that this is only a solution for users who don't transport the case though - when in transit the sleds must be used as shown here. The manual even makes mention of this.
To get at the drives in the P150, we have to open the entire front bezel. Three tabs hold it in place on the left side, then it hinges like a door for a while before being able to be lifted completely off the hinge. In another effort to truly separate this case from cheaper models, the entire area where intake air can be channeled through is covered by a double-height removable filter.
Once the front door has been lifted away, two thumbscrews are loosened and another door swings open to the left. In this shot, we've also already removed the air filter.
Before popping off the side of the new Antec case, we took a look at the rear and were pleased to see a large 120mm fan, especially given the case's dimensions. As always, larger fans generally are preferred, since they can move more air while making less noise. There's also venting near the expansion slots for additional passive cooling.
To get an unobstructed view of the interior of the P150, we took out the included power supply. What we were left with was simple, but not bad by any means. Overall, the P150 feels very solid. We're sure that it would be able to protect expensive components for a long time, but one would have to be mindful of the nice paint job.
Not including the external 3½" drive bay, the P150 has enough space for four hard drives, which is certainly plenty for most users. In this view, one can see how incoming air is directed over the hard drives, and if one wanted additional cooling, two extra 92mm fans could be installed.
Also note the rubber bands stretched across the sides of this cavity. These can be used for suspending the hard drives to effectively isolate all vibrations entirely from the chassis. Keep in mind that this is only a solution for users who don't transport the case though - when in transit the sleds must be used as shown here. The manual even makes mention of this.
To get at the drives in the P150, we have to open the entire front bezel. Three tabs hold it in place on the left side, then it hinges like a door for a while before being able to be lifted completely off the hinge. In another effort to truly separate this case from cheaper models, the entire area where intake air can be channeled through is covered by a double-height removable filter.
Once the front door has been lifted away, two thumbscrews are loosened and another door swings open to the left. In this shot, we've also already removed the air filter.
Originally published at https://www.anandtech.com/show/1922 (Wayback Machine).





