Archive 1997–2024

nForce4 SLI Motherboards: Premium Performance at a Bargain Price

FOXCONN NF4SK8AA-8KRS: Overclocking

FSB Overclocking Results

Front Side Bus Overclocking Testbed
Processor: Athlon 64, 4000+, San Diego Core
CPU Voltage: 1.5125V (1.4000V default)
Memory: OCZ PC4800 Platinum Edition
Memory Voltage: 2.85
Cooling: AMD Stock Heat sink and Fan
Power Supply: OCZ Power Stream 520
Maximum CPU Overclock
Standard Ratio (12)
248fsb x 12, 4x HT, (2.5-4-4-10, 1T)
2976MHz (+24%)
Maximum FSB Overclock
Lowered Ratio (9)
250fsb x 9, 4x HT, (2.5-3-3-7, 1T)
2250MHz (+25% Bus Overclock)

This board is a decent overclocker at standard ratios, considering its limitations in running our memory at 2.85V, but it was unable to reach higher than 250fsb at the lowered ratios. In fact, we were unable to get this board to post in any form past a 255fsb setting regardless of memory, HT, or voltage settings. At the settings listed, our test system was able to complete the entire benchmark suite three times without any reported issues.

Memory Stress Testing

Memory stress tests look at the ability of the Foxconn NF4SK8AA-8KRS to operate at the officially supported memory frequencies of 400MHz DDR, at the best performing memory timings that the OCZ Technology PC4800 Elite Platinum could support.

Foxconn NF4SK8AA-8KRS
Stable DDR400 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 5
Voltage: 2.8V
Command Rate: 1T

The Foxconn NF4SK8AA-8KRS was completely stable with 2 DDR modules in Dual-Channel at the settings of 2-2-2-5 at the default 2.8V.

Tests with 4 double-sided DIMMs on an AMD Athlon 64 system are very demanding, since AMD specifies DDR333 for this combination. However, most AMD Athlon 64 motherboards combined with recent AMD processors have been able to handle 4 DIMMs at DDR400 settings.

Foxconn NF4SK8AA-8KRS
Stable DDR400 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 10
Voltage: 2.8V
Command Rate: 2T

The Foxconn NF4SK8AA-8KRS was completely stable with 4 DDR modules in Dual-Channel at the settings of 2-2-2-10 at the default 2.8V.

Originally published at https://www.anandtech.com/show/1913 (Wayback Machine).