Archive 1997–2024

nForce4 SLI Motherboards: Premium Performance at a Bargain Price

Albatron K8SLI: Overclocking

FSB Overclocking Results

Front Side Bus Overclocking Testbed
Processor: Athlon 64, 4000+, San Diego Core
CPU Voltage: 1.4875V (1.4000V default)
Memory: OCZ PC4800 Platinum Edition
Memory Voltage: 3.00
Cooling: AMD Stock Heat sink and Fan
Power Supply: OCZ Power Stream 520
Maximum CPU Overclock
Standard Ratio (12)
246fsb x 12, 4x HT, (2-3-3-7, 1T)
2955MHz (+23%)
Maximum FSB Overclock
Lowered Ratio (9)
317fsb x 9, 3x HT, (2.5-4-4-8, 1T)
2856MHz (+58.5% Bus Overclock)

This board is a good overclocker at both standard and reduced ratios. We were unable to overclock the board past 246fsb with the stock ratio and still complete our benchmark suite. We relaxed the memory timings, increased voltages, and changed the HT ratio to 3 without success. However, the board posted the best lowered ratio fsb setting at a 1:1 memory ratio although its performance did not equal that of the Asus A8N-SLI Premium at the 295fsb ratio. At the settings listed, our test system was able to complete the entire benchmark suite three times without any reported issues.

Memory Stress Testing

Memory stress tests look at the ability of the Albatron K8SLI to operate at the officially supported memory frequencies of 400MHz DDR, at the best performing memory timings that the OCZ Technology PC4800 Elite Platinum could support.

Albatron K8SLI
Stable DDR400 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 5
Voltage: 2.8V
Command Rate: 1T

The Albatron K8SLI was completely stable with 2 DDR modules in Dual-Channel at the settings of 2-2-2-5, at the default 2.8V.

Tests with 4 double-sided DIMMs on an AMD Athlon 64 system are very demanding, since AMD specifies DDR333 for this combination. However, most AMD Athlon 64 motherboards combined with recent AMD processors have been able to handle 4 DIMMs at DDR400 settings.

Albatron K8SLI
Stable DDR400 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 7
Voltage: 2.8V
Command Rate: 2T

The Albatron K8SLI was completely stable with 4 DDR modules in Dual-Channel at the settings of 2-2-2-7, at the default 2.8V.

Originally published at https://www.anandtech.com/show/1913 (Wayback Machine).