Archive 1997–2024

Abit NI8 SLI: nVidia SLI for the Intel Gamer

ABIT NI8 SLI: Overclocking

ABIT NI8 SLI Overclocking Testbed
Processor: Intel P4 D840 EE 3.2 Ghz
CPU Voltage: 1.41V (default 1.385V)
Cooling: Gigabyte 3D Cooler Ultra GT
Power Supply: PC Power and Cooling Turbo-Cool 510 SLI
Memory: 2x Corsair CM2X512A - 5400UL v 1.2
Hard Drive: Western Digital 36GB Raptor 10,000RPM
Maximum OC:
(Standard Ratio)
220x16 (4x HT)
3520MHz (+9.4%)
Maximum FSB:
(Lower Ratio)
220 x 14 (4x HT)
(2 DIMMs in DC mode @ 667Mhz 3-2-2-8 1T)
(+9.4% Bus Overclock)

This was a very disappointing showing for the NI8 in the overclocking department. This CPU has proven to run at 3700-3800 MHz on air cooling while utilized on other similar Intel mainboards, so the overclocking roadblock is definitely not the CPU. My background is deep in overclocking experience over the years, including extensive water and phase-change cooling experience. All the stops were pulled out to get this particular setup higher, including raising VCore from 1.41V to its limit, dropping the LDT multiplier to 1 from 4, dropping the memory all the way down to 400 MHz, and lowering the multiplier to its minimum of 14. The system would muster a boot at 225 MHz FSB, but then freeze in Windows. 220 MHz FSB is rock-solid stable and the most that could be attained.

Raising the northbridge voltage has been key on other similar C19 northbridge based boards, but ABIT has left that option out and it most probably was a smart move. As mentioned before, its preset 1.4V combined with the Silent OTES cooling solution gets incredibly hot; more voltage invariably would overwhelm the supplied cooling beyond its capacity. My feeling is even with substantially better CPU cooling such as water or phase change, the limit here is the board itself and not the CPU. Upgrading the NB cooling could potentially help, but without the BIOS option to increase NB voltage we would only get halfway there.

Originally published at https://www.anandtech.com/show/1813 (Wayback Machine).