Archive 1997–2024

Intel Motherboards: Can a Diamond beat a Royal Flush?

Gigabyte GA-8I955X Royal: Overclocking

FSB Overclocking Results:

Front Side Bus Overclocking Testbed
Processor: Pentium 4 Prescott LGA 775
840EE Dual Core 3.2GHz
CPU Voltage: 1.425V (1.350V default)
Cooling: Intel Stock Cooler
Power Supply: OCZ Power Stream 520
Maximum CPU OverClock 241FSB x 16 (3856MHz) +20%
Maximum FSB OC: 272FSB x 14 (3808MHz) +19%

With a stock multiplier, the GA-8I955X Royal reached an overclock of 241x16 or 3856MHz. With a lowered multiplier, the GA-8I955X Royal reached an overclock of 272x14 or 3808MHz. Unlike the MSI P4N, the Gigabyte board did not disable the second core. It should also be noted that in both tests, the memory settings were set to auto with the Gigabyte GA-8I955X Royal running more conservative timings than the MSI P4N Diamond, which assisted in the higher CPU overclock.

While we were able to reach these OC levels with the Intel HSF, the long-term stability of the system at these speeds is very suspect. After running several tests, the system began throttling - alternating between stock speed and reduced speed due to overheating. There is no doubt the CPU can do these speeds or better but it will require an alternative cooling system. Unfortunately, due to the design and placement of the U-Plus DPS module, the cooling solutions available are limited.

Memory Stress Testing

Memory stress tests look at the ability of the GA-8I955X Royal to operate at the officially supported memory frequencies of 533MHz and 667MHz DDR2, at the best performing memory timings that the Patriot Extreme Performance PEP21G5600+XBL will support.

Gigabyte GA-8I955X Royal
Stable DDR533 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz (800FSB)
Timing Mode: 533MHz - Default
CAS Latency: 3
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 4
Voltage: 1.8V

The GA-8I955X Royal was completely stable with 2 DDR2 modules in Dual-Channel at the settings of 3-2-2-4 at 1.8V.

Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DDR2 modules on a motherboard.

Gigabyte GA-8I955X Royal
Stable DDR533 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz (800FSB)
Timing Mode: 533MHz - Default
CAS Latency: 3
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 4
Voltage: 1.9V

The GA-8I955X Royal was completely stable with 4 DDR2 modules in Dual-Channel at the settings of 3-2-2-4, but the voltage had to be increased to 1.9V.

We will now increase the memory frequencies to 667MHZ to see what effect this change has on the memory timings and stability of the board.

Gigabyte GA-8I955X Royal
Stable DDR667 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz (800FSB)
Timing Mode: 667MHz - Default
CAS Latency: 4
RAS to CAS Delay: 3
RAS Precharge: 3
RAS Cycle Time: 8
Voltage: 1.9V

The Gigabyte GA-8I955X Royal was completely stable with 2 DDR2 modules in Dual-Channel at the settings of 4-3-3-8 at 1.9V. The performance benchmarks were actually equal to or better than the 533MHZ setting on this board. However, this did not translate into better application performance compared to the MSI board.

Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DDR2 modules on a motherboard.

Gigabyte GA-8I955X Royal
Stable DDR667 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz (800FSB)
Timing Mode: 667MHz - Default
CAS Latency: 4
RAS to CAS Delay: 3
RAS Precharge: 3
RAS Cycle Time: 12
Voltage: 1.9V

The GA-8I955X Royal was completely stable with 4 DDR2 modules in Dual-Channel at the settings of 4-3-3-12 at 1.9V, but the RAS Cycle Time had to be switched to 12.

Originally published at https://www.anandtech.com/show/1796 (Wayback Machine).