Mid-Tower Mega Roundup
- Posted in
- Cases/Cooling/PSUs
DynaPower F3323 (cont'd)
Installing a fan into the cage is rather easy, but squeezing the assembled unit's sides to fit back into place on the back is a lot trickier. Unfortunately, this is another example where the tool-less ideology of the case is actually a detriment to the overall usability.
The expansion cards are all held down by a tool-less clip, which is also set off by bright plastic.
This system works very well, thankfully, and held our Radeon video card securely. In this first picture, the clip is flipped back so the card can be inserted easily.
When pushed from the back side of the case, the teal plastic tabs click into place to hold the metal bracket against all the cards equally.
Continuing the theme, even the installation of the motherboard can be done without a screwdriver, as plastic pegs are included to hold the motherboard down. They work well enough, but we'd prefer just using a screwdriver for this purpose, especially if used in any other case, the pegs have to be removed from the main board.
Getting back to something that we mentioned earlier, the power supply back plate has a slight mistake in its design.
With our OCZ PowerStream, the accepting socket for the main power cable didn't quite fit through the backing plate, causing the unit to not fit perfectly. It's a minor issue, but still a rather silly one to overlook.
Perhaps the only item of "flair" on the F3323 was discovered after we put our test bed in it. Instead of the typical green and red, the front LEDs are blue and white, which actually look pretty nice in our opinion.
Installing a fan into the cage is rather easy, but squeezing the assembled unit's sides to fit back into place on the back is a lot trickier. Unfortunately, this is another example where the tool-less ideology of the case is actually a detriment to the overall usability.
The expansion cards are all held down by a tool-less clip, which is also set off by bright plastic.
This system works very well, thankfully, and held our Radeon video card securely. In this first picture, the clip is flipped back so the card can be inserted easily.
When pushed from the back side of the case, the teal plastic tabs click into place to hold the metal bracket against all the cards equally.
Continuing the theme, even the installation of the motherboard can be done without a screwdriver, as plastic pegs are included to hold the motherboard down. They work well enough, but we'd prefer just using a screwdriver for this purpose, especially if used in any other case, the pegs have to be removed from the main board.
Getting back to something that we mentioned earlier, the power supply back plate has a slight mistake in its design.
With our OCZ PowerStream, the accepting socket for the main power cable didn't quite fit through the backing plate, causing the unit to not fit perfectly. It's a minor issue, but still a rather silly one to overlook.
Perhaps the only item of "flair" on the F3323 was discovered after we put our test bed in it. Instead of the typical green and red, the front LEDs are blue and white, which actually look pretty nice in our opinion.

Originally published at https://www.anandtech.com/show/1783 (Wayback Machine).



