Archive 1997–2024

Jetway 939GT4-SLI: Gem with a New SLI Twist

Memory Stress Testing

Our memory stress test measures the ability of the Jetway nForce4 to operate at its officially supported memory frequency (400MHz DDR), at the lowest memory timings that OCZ PC3200 Platinum Rev. 2 modules will support. All DIMMs used for stress testing were 512MB double-sided (or double-bank) memory. To make sure that memory performed properly in Dual-Channel mode, memory was only tested using either one dual-channel (2 DIMMs) or 2 dual-channels (4 DIMMs).

Stable DDR400 Timings - One Dual-Channel
(2/4 DIMMs populated)
Clock Speed: 200MHz
CAS Latency: 2
RAS to CAS Delay: 2T
RAS Precharge: 7T
Precharge Delay: 2T
Command Rate: 1T

Using two DIMMs in Dual-Channel 128-bit mode, the memory performed in all benchmarks at the fastest 2-2-2-7 timings at default voltage, which was the only memory voltage available.

Stable DDR400 Timings - 4 DIMMs
(4/4 DIMMs populated)
Clock Speed: 200MHz
CAS Latency: 2.0
RAS to CAS Delay: 2T
RAS Precharge: 7T
Precharge Delay: 2T
Command Rate: 2T

Tests with all four DIMM slots populated on the Jetway 939GT4-SLI required a 2T Command Rate with 4 DIMMs in two dual channels. This is the pattern seen on every other top-performing Socket 939 board. This performance is completely competitive with the best that we have seen on nForce4 motherboards for Socket 939.

Originally published at https://www.anandtech.com/show/1765 (Wayback Machine).