Athlon 64 Revision E: Unofficial DDR500 Support
- Posted in
- CPUs
Low End Dual Core + New Memory Dividers
With the X2 4800+, we saw that DDR436 offered basically no performance improvement, while DDR480 was a little more useful, bringing us anywhere between 1% and 5% of a performance improvement in our selection of tests. Given that the X2 4200+ has half the cache, its dependence on a faster memory bus should go up. But counteracting that relationship is the fact that the 4200+ runs 200MHz slower than the 4800+.According to our table of supported DDR frequencies by the DFI board, the 2.2GHz 4200+ gives us two options above DDR400 - mainly, 220MHz and 244MHz, or an unofficial DDR440 and DDR488, respectively.
Multimedia Content Creation Winstone 2004
We start off with MCC Winstone 2004 again:| Memory Speed | MMCC Winstone 2004 | % Improvement over DDR400 |
| DDR400 | 38.9 | N/A |
| DDR440 | 39.1 | 1% |
| DDR488 | 39.4 | 1% |
3D Rendering
3D rendering is another area where we see good use of dual core processors, but these tests also showed us a 0 - 1% increase in performance when comparing DDR480 to DDR400:| Memory Speed | 3dsmax 6 - SPECapc Rendering Composite | % Improvement over DDR400 |
| DDR400 | 2.54 | N/A |
| DDR440 | 2.54 | 0% |
| DDR488 | 2.54 | 0% |
| Memory Speed | Cinebench 2003 | % Improvement over DDR400 |
| DDR400 | 584 | N/A |
| DDR440 | 586 | 0% |
| DDR488 | 587 | 1% |
Despite the decrease in cache size, the faster memory bus didn’t do anything more for the X2 4200+.
Video Encoding
| Memory Speed | DivX 6 + AutoGK | % Improvement over DDR400 |
| DDR400 | 47.3 | N/A |
| DDR440 | 47.9 | 1% |
| DDR488 | 48.5 | 3% |
Here, DDR488 only gives us a 3% bump in performance. Nothing to write home about, but if your memory can support it, you might as well enable it.
| Memory Speed | Windows Media Encoder 9 (fps) | % Improvement over DDR400 |
| DDR400 | 3.88 | N/A |
| DDR440 | 3.91 | 1% |
| DDR488 | 3.92 | 1% |
Gaming
| Memory Speed | Doom 3 (1024 x 768 fps) | % Improvement over DDR400 |
| DDR400 | 108 | N/A |
| DDR440 | 111.2 | 3% |
| DDR488 | 113.6 | 5% |
In Doom 3, the X2 4200+ gets slightly more of a performance boost than the 4800+. But despite our theories, it seems that the X2 4200+ doesn’t really get any more of a performance boost than what the 4800+ did.
Just for curiosity's sake, we performed a DVDShrink encode while running the Doom 3 test, to see how two relatively memory bandwidth intensive tasks running simultaneously changed the picture, if at all. Note that alone, DVDShrink saw no performance boost due to DDR488 over DDR400:
| Memory Speed | Doom 3 (1024 x 768 fps) w/ DVDShrink running | % Improvement over DDR400 |
| DDR400 | 102.5 | N/A |
| DDR488 | 109.2 | 6.5% |
The performance boost in Doom 3 in this scenario went up another 1.5%, to 6.5% for DDR488 over DDR400. It wasn’t a huge jump, but once you start getting into those heavy usage scenarios, then the faster memory speeds make a lot of sense for the dual core Athlon 64 X2s.
Other lighter multitasking scenarios offered no real difference in performance for the X2.
| Memory Speed | DVD Shrink (Time in Mins) w/ Firefox & iTunes Running | % Improvement over DDR400 |
| DDR400 | 9.9 | N/A |
| DDR488 | 9.9 | 0% |
Originally published at https://www.anandtech.com/show/1731 (Wayback Machine).