HP L2335: Low Response Time and High Resolution LCD
- Posted in
- Displays
Quantitative Analysis
For the duration of this review, we connected the HP L2335 to a Radeon X800 Pro with factory default settings on the DVI connections unless stated otherwise. Brightness has been set to maximum as well.Luminance
Brightness ranked as one of our most important display qualities. On a display like the L2335, a dim image can make for a very poor viewing experience, since the resolution is so high. Fortunately, large displays are usually compensated for this with the addition of larger and brighter backlights. Too much compensation will result in an overly bright image, to which black levels and contrast ratios will suffer. Below, you can see a comparison of the brightness for each of our LCD monitors.
Our Contrast Ratio
We will use the same observation from the 19" LCD Roundup several months ago. Using PreCal and our ColorVision Spyder, we will measure the luminance of a pure white image and a pure black image on the LCD monitor. The observed contrast ratio is simply the highest recorded luminance divided by the lowest. All measurements are in candela per meter squared; larger contrast ratios are more desirable.| Observed Contrast Ratio | |||
| Highest Recorded (white image) | Lowest Recorded (black image) | Observed Contrast Ratio | |
| Apple Cinema 20" | 247.4 | 2.4 | 103.1 |
| BenQ FP931 | 256.4 | 3.6 | 71.2 |
| Dell 1905FP | 234.6 | 2.6 | 90.2 |
| Dell 2005FPW | 280.4 | 2.6 | 107.8 |
| HP L2335 | 280.5 | 2.6 | 107.8 |
| NuTech L921G | 278.2 | 2.6 | 107.0 |
| Planar PE191M | 234.0 | 3.0 | 78.0 |
| Samsung 193P | 230.4 | 2.2 | 104.7 |
| Samsung 910V | 219.8 | 2.6 | 84.5 |
| Sony SDM S94 | 233.8 | 3.0 | 77.9 |
| ViewSonic Q190MB | 261.8 | 2.6 | 100.7 |
Again, there is no surprise here where the HP performed the same as the Apple Cinema Display and the Dell 2005FPW. Since all three use LG.Philips LCD panels within the same generation, we had expected this. Again, note that the accuracy of our ColorVision Spyder is within 0.2 cd/m2 only, and this plagues the accuracy of our results. Our numbers should give you a good estimation of where each display falls in line with another, but it is far from an absolute authority.
Originally published at https://www.anandtech.com/show/1729 (Wayback Machine).