Archive 1997–2024

Ahanix MCE601


Construction

Apparently, the MCE601 has been designed to withstand quite a bit of weight, as the side and front panels are made of 1/8” thick steel. The case can be unscrewed into its various segments, which is nice for anyone who wants to do any custom installations or modding to the unit. The decision not to use any thumb screws is a bit of a shame, especially since given that it takes the removal of six screws (three from either side) to remove the top panel, but considering the main location and use of a system like this, it is doubtful that after the initial installation, one would have to access the interior of the case on a regular basis.

The front bezel is arguably the most important aspect of any HTPC case in regards to its construction, and the front brushed aluminum panel and its associated hinging door not only looks sturdy, but is also quite thick and should withstand many years of use.

The top removable panel is made of steel as well, most likely to help support the weight of additional units that might be sitting on top of the HTPC. Yet surprisingly, even with all the steel, the MCE610 weighs only 12.2 pounds without anything installed.

Originally published at https://www.anandtech.com/show/1674 (Wayback Machine).