OCZ VX Revisited: DDR Updates on DFI nForce4
- Posted in
- Memory
Test Results: Corsair XMS4404v1.1
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.| Corsair XMS4404v1.1 (DDR550) - 2x512Mb Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed | Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered | Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400DDR | 2-3-3-6 2.6V 1T |
536.5 | INT 2653 FLT 2839 |
INT 6113 FLT 6066 |
82 | 113.2 |
| 11x218 | 436DDR | 2-3-3-6 2.6V 1T |
543.2 | INT 2772 FLT 3023 |
INT 6488 FLT 6419 |
81 | 114.0 |
| 10x240 | 480DDR | 2-3-3-6 2.8V 1T |
553.7 | INT 3037 FLT 3243 |
INT 6723 FLT 6645 |
80 | 115.9 |
| 9x267 | 533DDR | 2.5-3-3-6 2.8V 1T |
562.0 | INT 3196 FLT 3477 |
INT 7084 FLT 7004 |
77 | 117.2 |
| 9x303 (2.73 Ghz) |
Highest Memory Speed | 2.5-4-4-6 2.9V 1T |
620.7 | INT 3403 FLT 3660 |
INT 7742 FLT 7683 |
73 | 131.1 |
| 10x280 (2.8 GHz) |
Highest CPU/Mem Performance | 2.5-4-3-6 2.9V 1T |
626.0 | INT 3409 FLT 3611 |
INT 7799 FLT 7707 |
71 | 135.8 |
Corsair was reviewed in Corsair 4400C25: Taking Samsung TCCD to New Heights. It is very interesting to see that the DFI board opens up performance of the Corsair a bit more, allowing use to reach a high of 303 (DDR606) at 1T compared to the 295 (DDR590) top 1T performance in the past review. However, the fastest performance was achieved at 10x280 at faster memory timings of 2.5-4-3-6 and a higher CPU speed of 2.8GHz.
Corsair selected Samsung TCCD chips for absolute best performance at the top and they succeeded in reaching this goal. The compromise was a bit less performance at DDR400 - at least with the modules that we tested. However, we suspect that the timings used by DFI are not the best match to this Corsair memory, since regular TCCD memory rated at DDR400 outperforms the Corsair at the top - results that are the opposite of what we have seen on other nVidia chipset boards. It looks as if Corsair and DFI could squeeze more performance from this combination with some tweaking.
It is interesting in these test results that the faster 9x303 (2.73GHz) cannot match OCZ VX at 2.67GHz. However, at 2.8GHz (10x280), the Corsair TCCD can roughly match performance of VX at 2.67GHz. It is clear that faster 2-2-2 memory timings of the OCZ VX do matter when it comes to performance.
Originally published at https://www.anandtech.com/show/1654 (Wayback Machine).