Archive 1997–2024

Sun Fire V40z: Four Opterons in a 3U


Compiling

We put a particular emphasis on compiling because it stresses the entire system (hard drive, processor and memory), but also because any *nix user knows that compiling is no fun on a slow machine.

GNU Make 3.79.1 / GCC 3.4.2

While GCC isn't multithreaded, we can run multiple jobs using the -j command in make . Below, you can see the significant improvement on performance going from 1 to 3 to 5 jobs. We used the commands as below to compile the Linux 2.6.4 kernel from kernel.org:

# yes "" | make config
# time make -jX


Kernel 2.6.4; make -jX

We also threw in some compile tests of entire GCC base, which take significantly longer than the Linux kernel to compile.

GCC 3.4.2: make -jX

Results were on par with what we had expected. Since we are not physically removing the processor in these benchmarks, the V40z scales much better than the dual W2100z. Three of our four processors are not doing anything particularly important, but all 8GB of memory are available to the single processor running the make threads.

Originally published at https://www.anandtech.com/show/1622 (Wayback Machine).