Archive 1997–2024

Intel's Pentium M on the Desktop - A Viable Alternative?


Memory Latency and Bandwidth

Currently, there are only two manufacturers of desktop Pentium M motherboards who are selling into the channel - AOpen and DFI. Both AOpen and DFI's motherboards came about not because of widespread consumer demand, but because they each had one customer that needed a Pentium M motherboard for a specific application. Once the boards were designed and built, they were later repackaged and made available to the public as an afterthought.

The major issue with both of these motherboards is that they are based on the 855GME chipset. The 855GME only features AGP 4X support, but the killer is in its single-channel DDR333 memory controller. Without DDR400 support, the 855GME starves the Pentium M for bandwidth, as it is only capable of delivering 2.7GB/s of bandwidth to main memory while the Pentium M at 2.0GHz needs 3.2GB/s of bandwidth to remain most efficient. Overclocking the memory bus is somewhat of an option, but not exactly the most desirable one for reasons that we will get to later.

One solution is Intel's recently released mobile 915 chipset, which features a dual-channel DDR1/DDR2 memory controller. The dual channel controller is more than capable of supplying the appropriate memory bandwidth to the Pentium M, if not a bit overboard, but right now mobile 915 isn't an option on the desktop.

With an unsatisfactory amount of memory bandwidth, the Pentium M will undoubtedly be held back in performance in applications where memory bandwidth is most important. As we all know, memory bandwidth and latency are interdependent, so let's see how the latency to main memory compares.

For our memory latency tests, we once again turn to ScienceMark 2.0:

 CPU  Memory Latency
(in ns)
AMD Athlon 64 3200+ (2.0GHz) 50ns
Intel Pentium 4E 560 (3.6GHz) 80ns
Intel Pentium M 755 (2.0GHz) 80ns

With an on-die memory controller, the Athlon 64 obviously offers the lowest latency memory access out of the group. The reason why we used a 2.0GHz Athlon 64 for this comparison was to show the memory latency seen by a CPU clocked identically to the Pentium M. As strong as the Pentium M's branch predictor may be, the trip to main memory will always be longer than the Athlon 64 - increasing the penalty from having a longer pipeline.

When you compare the Pentium M to the Pentium 4, you see the real harm in only having a single channel DDR333 memory controller - the time for the Pentium M to get to main memory is very similar to that of the Pentium 4, even when the latter is using higher latency DDR2 memory. High memory latency will send the performance of the Pentium M tumbling as soon as it leaves the sanctity of its low latency L2 cache.

Originally published at https://www.anandtech.com/show/1610 (Wayback Machine).