Archive 1997–2024

Value Case Roundup: A Look at the Affordable


Linkworld 3131G (cont'd)

We have seen the external and internal designs of the 3131G, but how does the entire structure hold up during typical uses of this case?


Construction

The 3131G is made of much thinner steel than in the 268WSP. It's the type of steel that we used to see in older PC cases back in the early 90s, which cut our hands at every opportunity. The 3131G has this same issue with sharp edges. Though the manufacturer has tried to fold over the edges of the steel, there are many areas still unprotected.


Cooling

The 3131G came with a single 80mm fan, which is mounted at the back of the case under the included power supply. The only other area to mount an 80mm fan is at the front of the case. The 3131G may have a hard time competing with the 268WSP's options to mount up to seven 80mm fans.

The 3131G also comes with a 300W P4 power supply. It may not be the best unit, but for the price of the case, it is quite a value.


Installation

As with the 268WSP, there were no special tool-less features that could reduce the total time to install our test bed. In fact, we spent a few more minutes to install the plastic stand-offs, since our motherboard needed a bit more support than readily offered in the 3131G.

We also found it annoying to have to hold a HDD while trying to screw it into the drive bays. Those platforms would have helped reduce tension from this tedious task.

The motherboard connectors for the USB ports were even worse than those of the 268WSP. Though they were labeled, it would have been better to include standardized connectors to reduce installation time


Originally published at https://www.anandtech.com/show/1604 (Wayback Machine).