Archive 1997–2024

Value Case Roundup: A Look at the Affordable


Powmax CP769PL (cont'd)

Construction

The 769 is constructed of a very thin sheet metal we were accustomed to before the thicker steels started making their way into the value case market. The steel is so thin we are afraid it will bend at the back with our power supply as it did on the 8654BL.

Sharp edges are also one of our worries because of how thing the steel is. We felt around the case and found an extremely large amount by the drive bays.

Cooling

The 769 also comes without case fans but there are quite a few options when mounting our own. As we mentioned there is an area at the bottom four expansion slots where we can mount an 80mm.


Two more can be mounted above that behind the CPU area.


And another two 80mm fans can be mounted at the front as intakes directly in front of the HDD bays.


Powmax has also bundled a 400W power supply, model LP-9900D, with the 769.

Installation

The only aspect of our installation we were worried about was the sharp edges cutting something, a wire or a hand. We were extremely cautious when working with the chassis to not hurt ourselves or our hardware while testing the 769.


Originally published at https://www.anandtech.com/show/1604 (Wayback Machine).