Value Case Roundup: A Look at the Affordable
- Posted in
- Cases/Cooling/PSUs
Codegen 6209 (cont'd)
Construction
The 6209 is made of 0.7mm steel, which makes it strong enough to withstand a lot more stress than the steel in the 3131G and it will definitely not bend because of power supplies or any other hardware.
The thicker steel also reduces sharp edges. We could not find any when we felt around the case, which is excellent.
Cooling
The 6209 comes with a single 80mm fan mounted at the back of the case and has room for one more at the front as an intake.

If you look on the left side panel, you will notice that Codegen has also implemented an air duct for the CPU, which will guide cool, outside air directly to the CPU.
There is also an optional PCI-E vent towards the middle of that same panel to help alleviate heat produced by a PCI-E graphics card.

Installation
Installation went as smooth as possible and took about 10 minutes to install all of our components. The tool-less expansion slots were also an unexpected feature and further reduced the time for installing add-in cards.

We wondered how much more it would cost to add such things as tool-less stand-offs to secure the motherboard without a screw driver, or even drive rails to the drive bays. Maybe we can see this in the future of value-priced cases?
Originally published at https://www.anandtech.com/show/1604 (Wayback Machine).