Archive 1997–2024

ATI FireGL V5000: Well-Rounded Mid-Range

The Test

This time around, we've used the same configuration we did in our previous workstation article, only we've added a PCI Express system to allow for the FireGL V5000. Unfortunately, we have not yet been able to get our hands on a DP PCI Express based system, so we were forced to go with a single FX-53 in place of the two Opteron 250 setup. We were not able to retest all the cards in a single processor configuration due to time constraints, but we did retest the ATI FireGL X3-256 with the latest driver in a single processor configuration.

Fortunately, most of the benchmarks we run cope well without the second processor. We left out obviously skewed tests like the 3DStudio rendering score from the SPECapc benchmark. When focusing on graphics performance tests we did a good job of targeting applications and tests that were impacted by only the GPU.

Performance Test Configuration
Processor(s):

2 x AMD Opteron 250
AMD Opteron 150
AMD Opteron FX-53

RAM:

4 x 512MB OCZ PC3200 EL ECC Registered (2 per CPU)
2x 1024MB Kingston PC 3200 ECC Registered
2x 1024MB OCZ PC3200 EB Platinum Edition

Hard Drive(s): Seagate 120GB 7200RPM IDE (8MB Buffer)
Motherboard & IDE Bus Master Drivers: AMD 8131 APIC Driver
NVIDIA nForce 5.10
NVIDIA nForce 6.10
Video Card(s): ATI FireGL V5000
3Dlabs Wildcat Realizm 200
ATI FireGL X3-256
NVIDIA Quadro FX 4000
HIS Radeon X800 XT Platinum Edition IceQ II
Prolink GeForce 6800 Ultra Golden Limited
Video Drivers: 3Dlabs 4.04.0608 Driver
ATI FireGL 8.083 Driver
NVIDIA Quadro 70.41 (Beta)
NVIDIA ForceWare 67.03 (6800U)
ATI Catalyst 4.12 (X 800)
Operating System(s): Windows XP Professional SP2
Motherboards: IWill DK8N v1.0 (AMD-81xx + NVIDIA nForce 3)
DFI LANParty UT nF4 Ultra-D (for PCI Express boards)
Power Supply: 600W OCZ Powerstream PSU


The Kingston RAM was used in the single processor Opteron setup, and the 1024MB sticks of OCZ EB were used in the DFI nF4 Ultra board. The Kingston RAM ran with ECC disabled at 3:3:3:10, while the OCZ memory ran with 2.5:3:3:10 timings.

Originally published at https://www.anandtech.com/show/1603 (Wayback Machine).