Archive 1997–2024

December 2004 HTPC Case Roundup


Benchmarks - Thermal

While home theater components rarely have fans to cool even the hottest components, it is critical for a PC to run as cool as it possibly can. There is no better way for this to happen than including an ample amount of case fans. Take a look at our test bed information.

HTPC Test Bed

DFI K8M800 MLV
AMD Athlon 64 3200+
Corsair DDR 512MB x 2
Zalman CNPS7000 Copper
Seagate Barracuda 120GB SATA
ATI 9800XT AGP8x
Enermax EG475P-VE 470W PSU



Click to enlarge.

We've taken temperature readings at every square inch of each HTPC chassis and have presented our results in visually appealing pictures below. Take a look at our results.


Ahanix D.Vine 5
Click to enlarge.

CoolerMaster Cavalier 2
Click to enlarge.


SilverStone Lascala 10/M
Click to enlarge.

NMediaPC HTPC 100
Click to enlarge.

It is evident that while the NMediaPC's HTPC 100 case had only a single 60mm exhaust, it performed almost as well as the LC10/M and the Cavalier 2, and better than the D.Vine 5 in our thermal benchmarks due to its smaller size as well as the numerous ventilated areas on the shell. On average, the ambient air temperatures per square inch varied by only fractions of a degree.


Ahanix D.Vine 5
Click to enlarge.

CoolerMaster Cavalier 2
Click to enlarge.


SilverStone Lascala 10/M
Click to enlarge.

NMediaPC HTPC 100
Click to enlarge.

The D.Vine 5, on the other hand, ran a bit hotter, since it only had two 60mm fans mounted at the back of the chassis as exhausts. Air was pulled in from a vent at the bottom of the case below the drive bays, but that was not enough to keep temperatures down.

Originally published at https://www.anandtech.com/show/1577 (Wayback Machine).