Archive 1997–2024

Photosmart M307: HP's Newest is Put to the Test


Resolving Fine Lines

For our resolution test, we reset the camera to its default settings and then used the highest resolution and quality setting with Tungsten WB. The camera was then set to +0.5 E.V. For more information, refer to our Testing Procedures page. The color space is sRGB. Below are 200% crops of the test. Click on a crop to see the full chart.




Click to enlarge.




Click to enlarge.


In both the horizontal and vertical crops above, the M307 just barely makes it to 1,100 LPH before becoming ridden with artifacts. Although this is a fairly good resolution performance for a 3 megapixel camera, we are disappointed to see moiré just past the resolution limit. We also spotted some hot pixels throughout the chart.

Originally published at https://www.anandtech.com/show/1554 (Wayback Machine).