Archive 1997–2024

SilverStone Lascala 10M: An Exclusive Look at SilverStone's Newest Creation


Installation

The LC10M is as large as the Ahanix D.Vine 4. There is a lot of space to install all of the components, including the power supply, motherboard, disk drives, and expansion cards. The total time that it took us to install all of those components was about 15 minutes.




Click to enlarge.


We had some trouble with the motherboard's power connector; it was directly beneath the 5-1/4" drive bays and had a clearance of a little over an inch. Those of us who know power supply wiring will also know how difficult it is to work in cramped cases.

The wiring had to be bent at almost 90 degrees for the wiring to be plugged into the power port on the motherboard. We were worried that this might cause damage to the wires, but we had no other choice. In the end, there wasn't much that we could do but warn our readers to choose a board with the power socket placed in another area on the motherboard. ATX motherboards usually have the socket at the top near the CPU socket.




Click to enlarge.


Installation of the other components was straightforward with the exception of the optical drive. We felt that the process of removing the front panel was unnecessary in order to add a single optical drive. The extra drive tray bezel attachment could have also been designed to replace the optical drive's existing tray bezel instead of sticking on to it with double-sided padding. It is a great idea overall, but, in our opinion, it still needs some adjustments in design.

Originally published at https://www.anandtech.com/show/1542 (Wayback Machine).