Archive 1997–2024

Logisys CS888UV: Glowing Acrylic!


Construction

In our July roundup, we explained three main aspects of acrylic cases to take notice during the selection process, two of which are assembly and cut. The CS888UV, like the CS888CL, can be completely exploded. This means that each part of the case is a separate piece of the puzzle and can be taken apart.

This is where annoyance came into play, since we had to remove 10 screws to get to the insides of the CS888UV. Logisys could have easily brought that number down to 4 if the points were positioned right; for example, one on each edge. And instead of using acrylic pieces glued to the panels as anchors, metal anchors at all points would have been much stronger and reliable (the acrylic ones cracked on us).




Click to enlarge.


On the opposite end of the spectrum, the cut of the individual pieces took our breath away. Each piece had nice clean edges, for which Logisys has been known since their first acrylic cases. There was no sign of a bad laser cut (visible bubbles formed in the acrylic), further proving a good quality manufacturing process.

Originally published at https://www.anandtech.com/show/1534 (Wayback Machine).