Archive 1997–2024

Logisys CS888UV: Glowing Acrylic!


Internal Design

Since we are dealing with a clear acrylic case, we are not surprised to see the insides of the CS888UV. To get a clearer view, though, we removed the side panel to show the various parts.

At the front, we see where the bundles of USB, audio, and the other front panel wires come together. There are two circuit boards: one for the power/reset buttons and lights and one for the auxiliary ports. The front instrument panel (power/reset buttons, lights) wiring is bundled as a single ribbon cable to reduce the mess that we have seen before in many cases.




Click to enlarge.


In the image above, the bundle of wires is twist-tied to one side of the drive bay mounts. The drive bays are actually two molded pieces of acrylic, which are screwed to the case from the top and bottom. We saw this design in the CS888CL, which was included in our clear case roundup in July.

There are a total of four 5-1/4" drive bays and eight 3-1/2" drive bays, two of which are exposed for floppy drive applications. As with the CS888CL, Logisys does not implement rubber HDD mounts on the CS888UV. Rubber stoppers help HDDs absorb any vibrations that may be carried through the acrylic to the drives. In effect, these stoppers greatly reduce the risk of damage to those HDDs.




Click to enlarge.


The expansion slots are supported by a steel casing that help increase the strength of the acrylic in that area when mounting add-on cards. We noticed how ClearPC had failed to implement this type of support in their Secret Agent suitcase style acrylic case, which resulted in a cracked area in the acrylic.




Click to enlarge.


Originally published at https://www.anandtech.com/show/1534 (Wayback Machine).