Archive 1997–2024

Bluetake's BT460EX Bluetooth Hi-Fi Audio Station Kit - A Quick Look


Bluetake's BT460EX BlueTooth Hi-Fi Audio Station Kit: Setup

In terms of form and overall physical design, the mini-amp, transceiver, and receiver are designed well to maintain a low profile. The only things that we didn't like were the antennas, which could only rotate 90 degrees, and the transceiver and receiver, which used the not-so-power-strip friendly AC adapter plugs.

Configuration is supposed to be so easy that you shouldn't even have to read the manual. The concept is simple: hook up main, rear, or other speakers without the use of wires.




Click to enlarge.


We set up the audio kit on our computer using the Y cable - 3.5mm stereo jack male to RCA left and right from the computer to the transmitter. On the receiver, we used the RCA left and right male to RCA left and right male to the mini amplifier; and from the mini amp, we used one simple bare speaker wire to our TransAudio speakers. If you don't want to use the mini amplifier, you don't have to, but the kit was intended to be used in this manner so that is how we are testing it.

Getting the system up and running is as simple as powering up the transceiver and receiver, and then hitting the pairing button (hold it down for 2 to 3 seconds). The mini amp should be powered on after this with the volume set on the lowest setting to avoid a very ear shocking jolt. The audio should be set up now with a blinking blue LED light on the transceiver and receiver to indicate active status. You can pause/resume the audio transmission by hitting the pairing button on the transceiver.




Click to enlarge.


Originally published at https://www.anandtech.com/show/1530 (Wayback Machine).