Archive 1997–2024

Sun's W2100z Dual Opteron Workstation


Compile Benchmarks

GNU Make 3.79.1 / GCC 3.4.2

Any programmer will always appreciate additional power during compile time. While GCC isn't multithreaded, we can run multiple jobs using the - j command in make. Below, you can see the significant improvement on performance going from 1 to 3 jobs. We did not include JDS benchmarks for this portion of the analysis, since comparing a 32-bit kernel build to a 64-bit kernel build are not comparative examples.

Kernel 2.6.4; make -j1

Kernel 2.6.4; make -j2

Kernel 2.6.4; make -j3

Once again, we cannot compare our old 32-bit results with our 64-bit results above. We are compiling a 64-bit kernel in a 64-bit world, whereas in our last CPU roundup, we were compiling a 32-bit kernel in a 32-bit world.

We included a few single processor compiles to demonstrate performance scales with multiple processors. For those interested, we also threw in some compile tests of entire GCC base, which take significantly longer than the Linux kernel to compile.

gcc 3.4.2; make -j3

Performance differences between the three systems are very negligible, although the w2100z machine does edge out the whitebox configuration.

Originally published at https://www.anandtech.com/show/1523 (Wayback Machine).