Archive 1997–2024

The SK Hynix Gold S31 SATA SSD Review: Hynix 3D NAND Finally Shows Up

Idle Power Measurement

SATA SSDs are tested with SATA link power management disabled to measure their active idle power draw, and with it enabled for the deeper idle power consumption scores and the idle wake-up latency test. Our testbed, like any ordinary desktop system, cannot trigger the deepest DevSleep idle state.

Note: Earlier this year we upgraded our power measurement equipment and switched to measuring idle power on our Coffee Lake desktop, our first SSD testbed to have fully-functional PCIe power management. The below measurements are all new, and are not a perfect match for the older measurements in our previous reviews and the Bench database.

Idle Power Consumption - No PMIdle Power Consumption - Desktop

The active idle power consumption of the SK Hynix Gold S31 SSDs is among the best we've seen from SATA drives, though the largest 1TB model requires slightly more power than the two smaller models. When SATA link power management is enabled, power consumption ends up being merely the typical values for mainstream drives.

Idle Wake-Up Latency

The idle wake-up process takes the S31s about half a millisecond, plenty fast and a factor of two better than other mainstream drive latency.

Originally published at https://www.anandtech.com/show/15076/the-sk-hynix-gold-s31-sata-ssd-review (Wayback Machine).