The SilverStone Strider Platinum ST1200-PTS 1200W PSU Review: Small in Size, Big on Compliance
Hot Test Results
Enhance is not an OEM who is known to focus on top-tier power quality delivery, and the tight dimensions of the ST1200-PTS certainly did not help the designer to improve much on that. The maximum voltage ripple on the 12V line reaches 86 mV under full load, quite close to the recommended design limit. The same stands for the 3.3V line, the voltage ripple of which reaches 42 mV under full load, with the 5V line faring a bit better. Severely cross-loading the PSU will cause the ripple to increase even further but the figures still stay within the recommended design limits. Voltage regulation on the other hand is exceptional, with the ST1200-PTS holding the 12V line at just 0.8% across the load range, with even tighter regulation on the 3.3V/5V lines.
| Main Output | ||||||||
| Load (Watts) | 241,12 W | 602,4 W | 899,32 W | 1196,12 W | ||||
| Load (Percent) | 20,09% | 50,2% | 74,94% | 99,68% | ||||
| Amperes | Volts | Amperes | Volts | Amperes | Volts | Amperes | Volts | |
| 3.3 V | 2,31 | 3,31 | 5,79 | 3,3 | 8,68 | 3,31 | 11,57 | 3,3 |
| 5 V | 2,04 | 5,02 | 5,09 | 5,01 | 7,64 | 4,99 | 10,18 | 4,99 |
| 12 V | 18,51 | 12,06 | 46,29 | 12,05 | 69,43 | 11,99 | 92,57 | 11,96 |
| Line | Regulation (20% to 100% load) |
Voltage Ripple (mV) | |||||
| 20% Load | 50% Load | 75% Load | 100% Load | CL1 12V |
CL2 3.3V + 5V |
||
| 3.3V | 0,5% | 18 | 32 | 46 | 42 | 26 | 36 |
| 5V | 0,65% | 12 | 24 | 34 | 32 | 22 | 32 |
| 12V | 0,8% | 16 | 32 | 52 | 86 | 92 | 20 |
The SilverStone ST1200-PTS is rated at 40 °C, meaning that the manufacturer specifies that it can output its advertised power when the ambient temperature is at or lower than 40 °C. Efficiency testing takes place at 25 °C and it degrades as the temperature increases, meaning that most units will not meet their certification requirements while we are testing them into our hot box. This is true for the ST1200-PTS, the efficiency of which drops by an average of 0.5% while operating into our hotbox and slightly below the 80Plus Platinum certification limits. On the other hand, the unit did reach its maximum 1200 Watts power output with an ambient temperature of 48 °C without issues, indicating fair resistance to thermal stress.
High ambient temperatures trigger the thermal control circuit to push the fan at its maximum speed very quickly. Although the PSU still is relatively quiet at very low loads, the fan’s speed goes to the maximum at 50% load, shooting the noise level of the ST1200-PTS to uncomfortable figures. Nevertheless, the internal temperatures of the PSU are, considering the very high output and the small volume of the unit, very low, ensuring the longevity of the unit. Thermal degradation is rather severe at very high loads and efficiency figures plummet, which is expected from such a design that is being pushed well above its rated temperature specifications – that it managed to output its full rated output is quite the feat as it is.
Originally published at https://www.anandtech.com/show/14969/the-silverstone-st1200pts-psu-review (Wayback Machine).




