Behind the Mask with Optimization and Catalyst AI
- Posted in
- GPUs
Anisotropic Filtering and The Test
To verify ATI's claim that full trilinear filtering was done on all texture stages while anisotropic filtering is enabled, we employed the D3D AF Tester. One of the fundamentals of Catalyst AI is that no benchmarks will be detected. So, we can be assured that the D3D AF Tester is not detected. Of course, their texture filtering optimizations may detect colored mip levels and change their behaviour. But even that is a valid optimization. There are fewer optimizations that you can make to trilinear filtering if the mip maps are not just scaled down versions of the original (which is certainly not the case here).
D3D AF Tester with Catalyst AI set to High.
Click to enlarge.

D3D AF Tester with Catalyst AI disabled.
Click to enlarge.
For all our performance tests, we used our AMD Athlon 64 FX 53 (overclocked to 2.6GHz) system. The graphics card that we employed was our ATI Radeon X800 XT Platinum Edition. We chose this card because performance enhancements such as these are generally amplified on higher performance hardware.
Originally published at https://www.anandtech.com/show/1488 (Wayback Machine).