SilverStone Technology Temjin 6: Another BTX Style in an ATX Form
- Posted in
- Cases/Cooling/PSUs
Internal Design
Since this is a BTX style case, which SilverStone has so carefully thought out in their design stage, the right side panel is the main access panel. Again, we saw this design in Lian Li's PC-V1000 BTX style case back in April. These manufacturers are sure whetting our appetite for the real BTX form factor.Upon removing the right panel, we are presented with a layout slightly different from the PC-V1000. First, the power supply and HDD mountings were at the bottom of the case in the PC-V1000. SilverStone has decided to move these up to the top of the case - the power supply where it would normally be in a standard ATX case, and the HDD mounts directly under it. We realized that the center of gravity in the Temjin 6 was much higher, possibly the highest it could get, compared to the PC-V1000 due to its location of two of the heaviest components in a PC.
The motherboard tray is then shifted downward with the CPU and memory at the lowest point in the case. This allows for the two fans, at the front and the back of the Temjin 6, to create a wind tunnel with the clear plastic half tubethat was included to help cool the CPU and memory. We will discuss this feature in more detail in the "Cooling" section. This patented half tube does include an extension that allows the case to be used in dual processor applications.
Moving to the front of the case, there are a total of five 5-1/4" drive bays, all exposed, as well as two exposed 3-1/2" drive bays for floppy drive applications. These bays make use of metal drive rails, which are included in the package to make drive installation a much easier task.
The HDD bays also utilize the drive rail system to mount them in the Temjin 6 under the power supply.
Originally published at https://www.anandtech.com/show/1487 (Wayback Machine).

