Archive 1997–2024

Beyond TV 3.5 - Adding Multi-Tuner Support, a Quick Beta Look


Beyond TV 3.5 - System Requirements and the Test

According to our most recent conversation with SnapStream, the hardware requirements of Beyond TV 3.5 are going to be tweaked a bit to account for multi-tuner systems.

Beyond TV 3.4 system requirements (pulled from CD insert shipped with Beyond TV):

  • Windows 98/ME/2000/XP (Windows 95/NT not supported)
  • Pentium III 733MHz (or AMD Athlon equivalent family processor)
  • 128MB of RAM
  • 16MB video card
  • 5GB hard drive
  • PCI, USB, AGP - TV tuner card with WDM (Windows Driver Model) driver support
Beyond TV 3.4 system recommendations (pulled from CD insert shipped with Beyond TV):
  • Windows XP
  • Pentium 4 1.4GHz and above
  • 256MB of RAM
  • 32MB video card
  • 40GB hard drive
  • PCI, USB, AGP - TV tuner card with WDM (Windows Driver Model) driver support
  • Internet access (broadband connection recommended)
While they haven't given out specifics, SnapStream is only planning on raising the CPU and system memory requirements/recommendations for multi-tuner configurations. It could be that there is a blanket increase, just so there isn't confusion between the four.

Four requirements/recommendations for SnapStream's Beyond TV include:
  • single TV tuner system requirement
  • single TV tuner system recommendation
  • multi-tuner system requirement
  • multi-tuner system recommendation
The multi-tuner recommendation from SnapStream (if there is one) is likely to be: use hardware encoding TV cards, like the WinTV PVR-250/350 cards from Hauppauge because they don't put the encoding burden on the CPU. If you think about it, using TV tuner cards that require software encoding for a multi-tuner system would require a more powerful CPU as the number of software encoding cards go up. Obviously, you can only go to the nth TV tuner that doesn't do hardware encoding even with the most powerful CPU on the market before you encounter massive encoding lagging across the board. In theory, this is not so with hardware encoding cards.

Based on our talks with SnapStream, the shipping version of Beyond TV 3.5 should have a "fail safe" that locks out the use of a second software tuner or any subsequent software tuner other than the one already in use. SnapStream allows the use of one TV tuner that requires software encoding (you can choose which software encoding card even if you have the umptieth software encoding TV card installed) mainly because they are trying to keep the buyer in mind, one who will use an All-in-Wonder card (software encoding TV card plus graphics card) and other hardware encoding cards. That, however, is not an "officially" supported multi-tuner configuration. In fact, according to SnapStream, any multi-tuner configuration that includes a software encoding TV card will be technically unsupported. (Technically, you could use an All-in-Wonder card with two PVR-250s and not use the All-in-Wonder as a 3rd tuner and still get a supported configuration, since the AIW just functions as a graphics card.) And while this puts constraints on the cards that you can use for a multi-tuner configuration, SnapStream tells us that they are expanding their list of supported TV tuners. So, if Beyond TV 3.4 isn't "working out for you" due to your current TV card, you might want to hold off till version 3.5. According to SnapStream, for Beyond TV 3.5, any card that follows the Microsoft MCE API should work.

Currently, the list of supported cards is (pulled from Beyond TV 3.4 system requirement page) as follows:

With Hardware Encoding:
  • Adaptec VideOh! Media Center (USB 2.0)
  • ADS Tech Instant TV Deluxe
  • Hauppauge WinTV-PVR-250
  • Hauppauge WinTV PVR-250BTV
  • Hauppauge WinTV-PVR-350
  • Hauppauge WinTV-PVR USB2
  • Pinnacle PCTV Deluxe (USB 2.0)
Without Hardware Encoding:
  • ADS Tech Instant TV
  • ASUS TV880
  • ATI All-In-Wonder PCI and USB
  • ATI TV Wonder family
  • ATI All-In-Wonder Radeon family
  • ATI TV Wonder PCI
  • ATI TV Wonder USB
  • ATI All-In-Wonder 128 family
  • AVerMedia AverTV Stereo (PCI)
  • AVerMedia AverTV Studio
  • Hauppauge Win-TV GO FM
  • Hauppauge Win-TV Go (PCI)
  • Hauppauge Win-TV Go Stereo (PCI)
  • Hauppauge Win-TV Radio
  • Hauppauge Win-TV USB
  • Hauppauge Win-TV USB Pro
  • I/O Magic PC PVR
  • LifeView FlyVideo 98 (PCI)
  • nVidia Personal Cinema FX
  • nVidia Personal Cinema GeForce4
  • nVidia Personal Cinema GeForce4 MX Osprey - 100 (PCI)
  • Pinnacle PCTV (PCI)
  • Pinnacle PCTV (USB)
  • PixelView XCapture STB Systems (PCI)
  • TerraTec Cinergy 400 TV
Our test system for SnapStream's Beyond TV 3 was the Shuttle ST61G4 XPC with a Pentium 4 at 2.6GHz, 1GB of Kingston HyperX PC4000 RAM, ATI All-In-Wonder 9600 Pro, Hauppauge WinTV PVR-250, Hauppauge WinTV PVR-250BTV, and a Seagate Barracuda 7200.7 120GB hard drive.

Originally published at https://www.anandtech.com/show/1447 (Wayback Machine).