Linux and L2 Cache; Sempron vs. Athlon
- Posted in
- Linux
TSCP
You may recall from our Opteron 150 comparison that optimization flags heavily influenced performance in the benchmark. We wanted to run this test in a similar fashion to the way we did John The Ripper with three seperate configurations for compilation. Below you can see which flags we used for each "configuration" when compiling. The march flag used for the Sempron 3100+ was "k8"; using the "athlon" flag actually degraded performance.
- Configuration 1.) -O2
- Configuration 2.) -O3
- Configuration 3.) -O2 -march
- Configuration 4.) -O3 -march
You may notice we did not include the Athlon XP processor in this portion of the benchmark. There are some optimizations somewhere in the program that gave us unusual results with GCC 3.3.3; we are looking into this problem.
Crafty
Crafty v19.15 was included to keep our TSCP benchmarks sane. We used the standard "make linux" target. The benchmark was generated by running the "bench" command inside the program.
Originally published at https://www.anandtech.com/show/1438 (Wayback Machine).