Archive 1997–2024

Enermax Sea Hawk


Construction

The Sea Hawk is made of 0.7mm thick SGCC steel. At first sight, the top, left, and right panels may look to be brushed aluminum, but they are also made of 100% SGCC steel. As we mentioned before, there were many sharp edges inside the case that could do some damage to wiring or wandering hands and could have been dulled or folded over to do away with them.

The front panel of the Sea Hawk is covered by a 2mm-thick piece of acrylic, which carries over to the drive bay covers as well to give the façade of a sleek look throughout.




Click to enlarge.


Again, Enermax has tried to employ a tool-less design in the Sea Hawk, but stopped short when it came to drive mountings and the motherboard tray, both areas in which simplicity and convenience is highly urged.

Originally published at https://www.anandtech.com/show/1427 (Wayback Machine).