Archive 1997–2024

Creative Labs' Sound Blaster Wireless Music - Music at Home Minus the Cables


Sound Blaster Wireless Music - Cableless Setup

Once the receiver is set up, it can be placed anywhere in the home within the wireless network range (receiver has a range of 98ft, remote has a range of 32ft). The receiver itself has a fairly small profile, measuring in at 6.89 x 5.51 x 1.1 inches, and it is similar in size to some of the newer networking access points that we have seen.




Click to enlarge.


The RF remote that comes with the receiver, however, is quite bulky and is insanely large for a remote; it measures in at 2.91 x 7.4 x 1.18 inches. This is mainly because of the large buttons, 27 x 55 mm LCD screen (132 x 64 res.), and Creative's choice of using 3 AA batteries to power the unit (it supposedly should last 55 days with normal use). The buttons on the remote have a nice tactile feel and response time, both of which are about the same as the ones on a typical TV or DVD player remote.




Click to enlarge.




Click to enlarge.




Click to enlarge.



Holes are for the receiver stand
Click to enlarge.


The design of the receiver is fairly simple. On the front, there is a single button that initiates the RF remote to beep loud enough so that you can find it across the room or under a couch. The back of the receiver is home to the USB 1.1, optical audio out, power, and RCA (left and right channel) ports. Creative only includes a Y left and right RCA to 1/8th inch audio jack cable with the receiver, aside from the USB and power cables, so you will probably have to purchase an optical out cable if you want to use the optical out option. Note that the receiver will only support 2.1 surround sound, which is (in all likelihood) the most reasonable setup since most MP3s have only two channels.

Originally published at https://www.anandtech.com/show/1417 (Wayback Machine).