Archive 1997–2024

Intel 915 Graphics: Graphics Media Accelerator 900


The Test

For these tests, the maximum amount of memory available on each integrated solution was used. Rather than testing with the highest settings enabled, we decided to test with settings targeted at a lower performance system. All these tests were performed with 32bit color, but most features were disabled and lower memory bandwidth settings were favored. More detailed explanations of settings for each game accompany our graphs.

 Performance Test Configuration
Processor(s): Intel Pentium 4 2.8C
Intel Pentium 4 3.4C
RAM: 2 x 512MB DDR400 @ 2:3:2:6
Hard Drive: 120 GB Seagate 7200.7
Chipset Drivers: Intel Chipset Driver 6.10.1002
ATI CATALYST 4.7 Motherboard/IGP drivers
Video Card(s): ATI Radeon X300 SE
Intel Graphics Media Accelerator
Intel Extreme Graphics 2
ATI Radeon 9100 IGP
Video Drivers: Intel Graphics Driver 6.14.10.3756
ATI CATALYST 4.7
Operating System: Windows XP Professional SP1
Motherboard: Intel D915GUX
Intel D865GBF
Jetway RS350

It is very important to note that our Jetway RS350 board would only boot our Intel Prescott Engineering Sample at 2.8GHz, and therefore, the ATI 9100 IGP numbers are based on a system running at a 600MHz lower processor frequency. Interestingly, this almost makes up for Intel's lack of hardware geometry processing.

For each game, we also ran 4 different clock speeds on the 915G board to see how processor performance assisted in graphics performance in light of the missing hardware geometry processing.

For our image comparisons, we pit the Intel Graphics Media Accelerator 900 against the ATI 9100 IGP at the same quality settings. These serve to give an idea of the differences between the two integrated platforms as well as the image quality associated with the performance numbers.

Originally published at https://www.anandtech.com/show/1413 (Wayback Machine).