Archive 1997–2024

Monarch Hornet Pro: "SFF" meets PCI Express, DDR2


Monarch Hornet Pro: Overclocking and Memory Testing


Overclocking Testbed
Processor: Pentium 4 3.4GHz LGA775
CPU Voltage: 1.3875V (default)
Cooling: Stock LGA775 HSF
Power Supply: Topower TOP350FX (350W)
Maximum OC:
(Default Ratio)
208FSB
3536MHz (+4.0%)
Maximum FSB: 208FSB @ 14X multiplier

As we explained in the BIOS section of this review, the Intel D925XBC doesn't allow much in the way of overclocking capability. As shown above, we were able to reach 208MHz FSB (the limit available in the BIOS). And as we've said before, that's no where near acceptable for enthusiasts and also no where near the levels that we're seeing with most 925X motherboards from other manufacturers.

Memory Stress Test Results:

This memory stress test is very basic, as it simply tests the ability of the Monarch Hornet Pro to operate at its officially supported DDR2 memory frequency of 533MHz, at the best performing memory timings that our Corsair XMS2 DDR2-533 modules will support. Memory stress testing was conducted by running RAM at 533MHz with 2 DIMM slots filled.

Stable DDR533 Timings
(2/4 DIMMs populated)
Clock Speed: 267MHz
Timing Mode: N/A
CAS Latency: 4.0
Bank Interleave: N/A
RAS to CAS Delay: 3T
RAS Precharge: 10T
Precharge Delay: 3T
Command Rate: N/A

Unlike the original DDR-I SDRAM modules that we have used for the overwhelming majority of previous memory stress tests in the past few years, today, we are delving into somewhat new territory with DDR2 memory timings. As you can clearly see above, DDR2 latency is considerably higher compared to DDR-I latencies like CAS 2-2-2-6, timings to which we've become accustomed in the past. This obviously accounts for some of the reasons why 925X systems don't perform any better than 875P systems. But on the whole, you need not concern yourself with DDR2 memory timings with 925X systems until 925X systems actually become competitive with the competition, after Intel releases at least 4GHz processors later this year.

Originally published at https://www.anandtech.com/show/1412 (Wayback Machine).