Thermaltake XaserV Damier V6000A
- Posted in
- Cases/Cooling/PSUs
Internal Design
When we opened up the case, we were presented with what looked like a jungle of wiring. There was wiring for fans, wiring for rheobus, wiring for the fans to connect to the motherboard, and not to mention the standard auxiliary audio, USB, and firewire wiring on top of it all. In total, there were about 15 different bundles of wires in the case before anything was even installed.Even though the wiring was labeled clearly, there was just too much of it to connect all of it to the fans and motherboard quickly and easily.
Adding the power supply only worsened the problem...
Besides the clutter, the V6000A had a good internal design. The hard drive bay was positioned sideways to allow all wiring to be connected from the side, slightly reducing the mess of cabling.
Similar to the VM3000A that we looked at, the V6000A has a swinging door made of plastic, which houses two of the case's five total fans, as well as the supports for add-on cards, which we saw in the VM3000A.
Originally published at https://www.anandtech.com/show/1401 (Wayback Machine).



