Archive 1997–2024

Albatron and ASUS GeForce 6800 Ultra Vendor Review


Noise Level Comparison

For this data set, we wanted to isolate the sound level of the graphics card from that of the CPU fan. As the GPU fan in both these systems is the loudest component, the SPL of the entire system will be very close to that of the GPU HSF itself, but we were able to do a little math to get something very close to our goal.

As our SPL meter measures sound pressure in dB, and SPL is measure in an RMS fashion, we need to do a little bit of math. First, we find the ambient SPL (SPLamb), then the SPL of the system with the CPU (SPLamb+cpu), and finally the SPL of the entire system (SPLsys). The SPL was measured at half a decimeter from the GPU fan. After we collected our data, we used this formula to determine the SPL of the GPU fan without the CPUfan:

gpufactor = (10(SPLsys / 20))2 - (10(SPLamb+cpu / 20))2
SPLamb+gpu = 20 log(sqrt(gpufactor + (10(SPLamb / 20))2))

And after all that, we end up with some comparable noise numbers. And we can see that the Albatron is quieter than the ASUS (generally a 1dB increase is an audible change, while a 6dB increase is perceived as twice the volume, but volume perception varies from person to person).

We are measuring fairly close to the source of the sound here, and it may be more useful to test SPL inside a case at about a meter, but deciding on exactly what to do with that is tricky. For now, this will have to do, but we are open to suggestions on how to proceed with sound tests.

Noise level

Originally published at https://www.anandtech.com/show/1396 (Wayback Machine).