Archive 1997–2024

DDR2 Roundup: Reaching for 667 and Beyond


Corsair XMS2 5300C4PRO

Corsair is well known as a producer of Enthusiast memory, so it came as no surprise that Corsair is first to market with DDR2 memory rated as the next standard of PC-5300 or DDR2 667. The timing of Corsair's introduction, however, was a bit of a surprise, just two weeks after Intel's introduction of the new DDR2 technology. With the difficulty of getting DDR2 to market, DDR2 667 was not expected to appear so quickly - especially at the aggressive 4-4-4 timings rather than the JEDEC 667 timings of 5-5-5.

Test DIMMs were a matched pair of XMS2 PRO with the activity LEDs.



We first saw the LEDs in our review of Corsair XMS4000 PRO and again, in the review of Corsair DDR400 2-2-2 that was recently introduced. Corsair uses the PRO designation to indicate LED activity lights on the memory.



While Corsair did not reveal the manufacturer of the memory chips used in their new XMS2 667, we suspect that the memory is based on specially binned Micron DDR2 533 chips, which were introduced about two weeks ago. The performance across the board matches very closely to Micron and Crucial DDR2 memory tested in this roundup.

Test Results: Corsair XMS2 5300C4PRO

The full suite of benchmark tests were run at all memory speeds. This includes Quake3, Super PI, Sandra 2004 SP2 Memory Tests, Aida 32 Memory Tests, and Return to Castle Wolfenstein-Enemy Territory. We also ran UT2003, Aquamark 3, and Comanche 4 at every memory speed to verify stability of the reported memory timings. All benchmarks and additional tests had to complete without incident for the memory settings to be considered stable.

Corsair XMS2 5300C4PRO (DDR2 667) - 2 x 512Mb Double-Bank
Speed Memory Timings & Voltage Quake3 fps Sandra UNBuffered Sandra Standard Buffered Super PI 2M places
(time in sec)
533DDR
800FSB
3-3-3-10
1.85V
371.4 INT 3196
FLT 3232
INT 4944
FLT 4945
107
667DDR
1000FSB
4-4-4-10
1.85V
458.0 INT 3867
FLT 3898
INT 6170
FLT 6148
86
686DDR
258FSB
4-4-4-10
1.85V
471.7 INT 3979
FLT 4022
INT 6322
FLT 6305
83

Corsair XMS2 5300C4PRO (DDR2 667)
Speed RCW-ET
Radar
Aida 32
Read
Aida 32
Write
Aida 32
Total
533DDR
800FSB
78.4 5451 2280 7731
667DDR
1000FSB
97.5 6627 2770 9397
686DDR
258FSB
100.3 6836 2878 9714

Since there is no motherboard support at this time for a standard DDR2 667 memory, Corsair has programmed the SPD to 4-4-4-12 timings at DDR2 533. These are actually the rated timings for DDR2 667 performance. It is clear that XMS2 667 performs significantly better than 4-4-4 at 533, performing with faster 3-3-3 timings at 1.85V with no effort at the 533 speed. Corsair easily met the DDR 667 4-4-4 specifications at DDR2 667, at the same low voltage of 1.85V.

It is not surprising that the Corsair 667 had no problem running at the highest speed that the Abit AA8 currently supports at DDR2 686. Since this was accomplished at the same 4-4-4 timings and 1.85V, it certainly is logical to expect that the XMS2 667 is capable of even higher speeds than we can currently achieve on 925X motherboards.

Originally published at https://www.anandtech.com/show/1382 (Wayback Machine).